tile worker can be said to be the "dirtiest and most tiring" of the four major decoration jobs.
and sounds easy to use
"Isn't it just sticking the wall tiles on the wall"
In fact, it is done
not only requires superb skills but also rich experience
Come to the construction site of dark blue decoration
See how the masters construct ~
- Construction community: Shanhefu
- Construction unit: dark blue decoration
- Construction stage: tiling stage
Construction site environment
Construction site door is strictly protected by door covers to avoid scratches and bumps.
Walk into the construction site, the internal environment is very clean and can be regarded as a standardized model.
There is no debris on the floor. The brick materials required for laying are placed regularly by the wall, which does not affect the construction site environment or hinders the daily work of the master.
tile construction process
When the editor arrived at the construction site, the tile worker was smoothing the back of the cut tiles with cement ash to ensure that the overall cement is full and flat.
Then use tools to pull the groove on the back of the tiles. The master said that this is to increase the adhesion of the tiles and minimize the risk of tiles falling as much as possible.
Then the tiles are laid on the position. After confirming the angle position with the help of a level, use a rubber hammer to tighten them to make air discharge from the groove and make the tiles more fit with the wall.
The edges of the tiles are cleanly closed with a spatula and fixed with a leveler.
tile worker master surnamed Yin. He has been engaged in this industry for more than 20 years. Since taking office at Deep Blue Decoration, he has been very serious and responsible in his work. He is also very diligent in learning and keeping up with the latest technology and not leaving behind others.
is approaching the high temperature of 40 degrees. In such a summer, even with the fan on, Master Yin's work clothes are already sweating.
Master Yin also told us that before construction, glazed wall tiles or exterior wall tiles will be soaked for about 2 hours in advance. After no longer absorbing water, it will be taken out and dried before construction.
In the construction standard of dark blue decoration, problem bricks are strictly prohibited from being put on the wall.
The wall and floor tiles after laying should be free of porcelain explosion, and the four corners of the bricks after laying should be flat, without any wrong seams. The bathroom should reserve a running slope, and the yin and yang angle should be vertical 90°.
The bathroom should reserve a flowing slope, and the yin and yang angle should be vertical 90°.
wire box and hole position should be cut beautifully.
Perfection comes from details, details lie in control, and every drop of sweat dropped by is dedicated to the satisfaction of the owner.
Hydropower Construction
Dark Blue Decoration Before the tiles officially start construction, a complete acceptance of the hydropower must be carried out. Only after the water and electricity acceptance is completed can the tiles enter the site for construction.
In order to prevent damage caused to wire pipe during construction and to prevent hidden dangers, it is also necessary to protect the finished product of the water and electricity pipes.
In order to avoid the sympathy of cold and heat, thermal expansion and contraction can easily cause the paint layer of the pipe groove to crack and destroy the waterproof, the spacing of hot and cold water pipes is controlled to be about 15cm, and it is distinguished by water pipes that do not use color.
It is precisely because dark blue decoration has its own review standards. No matter which job type, the masters strictly follow the standards and supervised by the project manager: "Only good construction quality can the owners have no worries!"
