Diatom mud is a popular environmentally friendly decoration material in recent years. How is diatom mud spraying been constructed? Let’s take a look at the construction methods of diatom mud spraying and the precautions for diatom mud electric spray guns.
Diatom mud spraying construction method
Diatom mud spraying refers to spraying diatom mud on the wall with spray gun . This method is suitable for large-scale construction and is more effective than other methods.
Construction method:
1. Use protective tape to protect doors, windows, furniture, wooden boards and other objects to avoid getting dirty during construction.
2. Prepare the diatom mud in proportion, then find a board to try it, and adjust the oil output and pressure of the spray gun.
3. During the spraying process, the route is first specified. Generally, spray the top and then the bottom, spray the inside and then the outside, so that it will not be everywhere.
4. Generally, you need to spray twice. The first time is to cover the wall to avoid exposing the bottom. You can only spray the second time when the first time is about to dry.
5. If the surface is to be made into concave and convex shape, scrape and press before forming the diatom mud.
6. After the construction is completed, tear off the protective tape as soon as possible and use a brush to straighten the edges.
Notes on electric spray guns for diatom mud
1. Prepare the diatom mud in proportion before spraying. The electric spray gun is suitable for liquid with a viscosity range of 20 to 40 seconds that can flow through the funnel, and then find a board to try it.
2. The spray gun should be sprayed at a constant speed and cannot be reversed.
is generally sprayed twice. The first time sprays a layer of film, and after it is completely dry, the second time can be sprayed. The first time can be slightly thinner and the second time can be slightly thicker.
3. The spray gun should be cleaned in time after spraying.
spray gun should be cleaned in time after spraying to prevent the spray hole from being blocked after the diatom mud is dried, extending the service life of the machine, and making it easier for the next time to use.
Cleaning method: Spray clean water in the watering can for about 30 seconds and 60 seconds. Be sure to completely spray the remaining dirt in the valve core until the clean water is sprayed out.
