There are many bottles and jars in the bathroom, and the space is relatively humid, so the storage design is very important. Compared to making cabinets, the niche design is more suitable for bathrooms. Dig a hole directly in the wall, saving space and money.
. Nick formation conditions
Nick design is to better utilize the space, so if you want to make a niche in the bathroom, the following conditions must be met.
. There are concave and convex positions in the bathroom
If the bathroom itself has concave and convex positions, you can directly design a niche in the concave place, which is simple and practical.
. There is a wall-mounted toilet or wall-mounted shower
If you have a wall-mounted toilet or wall-mounted shower at home, you need to build a fake wall, and the fake wall becomes the best place to design niches.
, there is non-load-bearing wall
If the bathroom has a non-load-bearing wall, such as a dry and wet wall separation wall, you can directly chisel the wall to design a niche.
2. Precautions for alcove design
Details determine success or failure. During the construction of alcoves, there are many details that need to be paid attention to.
, thickness of niche
The thickness of niche will be designed to be around 15-20cm, so the walls that need to be dug must be a non-load-bearing wall, and the wall thickness shall not be less than 25cm, so that it is safe.
, niche size
The size of the alcove is based on the actual situation of the bathroom. It is recommended that the size of the slot is greater than the design size 5-10cm, which is to make it easier to leave enough space to find repairs and tiles in the later stage.
. The height of the niche
There is no fixed height of the niche, and it can be designed according to the location. It is not advisable to design too high, otherwise it will be inconvenient to pick up the above.
, niche material
tempered glass is easy to clean, easy to construct, but will break. The stone or ceramic tile is hard and durable, but its appearance is slightly worse. The wood niche is of high appearance, but it is afraid of moisture and is not suitable for bathrooms.
. Selection of alcove location
Bathroom design niches, the following 5 locations are the most suitable.
,
above the toilet. If it is a wall-mounted toilet, 10cm of space can be used as a niche on the fake wall, and it is very useful to place green plants or bathroom supplies.
Even if it is an ordinary toilet, as long as the wall behind is not a load-bearing wall and its thickness is more than 25cm, you can also consider chiseling a wall to make a niche.
(A mini program has been added here, please go to the Toutiao client to view)
,
shower area or bathtub, you often need to put shampoo shower gel , etc., you can directly design niches, which are more practical than storage racks.
, bathroom cabinet
If there is a gap next to the bathroom cabinet or a non-load-bearing wall, and the wall thickness is more than 25cm, there will be space for the niche to be chiseled out.
,
The bathroom is prone to irregular spaces, and many niches can be made into niches, making it very convenient to pick up things at your fingertips.
, dry and wet separation wall
If the dry and wet separation wall is not a load-bearing wall and the wall thickness is not less than 25cm, then you can chisel 15-20cm to design a niche, which is very practical.
was edited by Qijia editor, and some of the pictures are from the Internet. Please delete if infringement!
Follow me to install a good house! If you have any decoration problems, you can send a private message to the editor. You can also give away free electronic version of "Decoration One Book" or 100 sets of case galleries to avoid detours in your home decoration! ! !
