Since the introduction of " coal to electricity , coal to gas", there have been more and more users of heating radiator ; many people consider using radiator for heating. So, how much does it cost to install a set of radiators? How much does it cost per month after installation? Let’s learn more about it with Brother Jin Flagship.
Radiators installed in different regions are different, and the price required for the house size is also different. Today, the editor will use 100 square meters as an example to calculate.
A complete set of radiators installation requires: wall-mounted boiler , radiator, water dispenser , construction fee.
1. Radiator:
Due to the different heat dissipation of each radiator, the price will also be different. We will first set a tentative steel 60D model with a height of 600mm. This radiator is priced at 93 yuan/column on JD.com, and the thermal area is 1.7 meters/column. By dividing 85 square meters by 1.7 meters, you can find that at least 50 radiators are needed to be installed in the entire house. The room loss must also be reduced. If there are patients, elderly people, and children at home, 1-2 more columns need to be installed in each room.
Assuming it is three bedrooms, one living room and one bathroom, a total of 60 columns of radiators are required, and the total price is about 5,580 yuan. However, the price of a single column is the price before the discount. During holidays, store celebrations, etc., shopping malls, platforms, and manufacturers also have many discounts, such as full discounts, discounts, gifts, etc. The total price will be much lower. In addition, the installation cost of radiators is basically between 4,000 and 6,000 yuan.
2. Wall-mounted boiler:
Wall-mounted boiler is the heat source of the radiator. The wall-mounted furnaces on the market now can not only provide heating, but also provide domestic water. When we purchase, the prices of wall-mounted boilers of different brands and models are different. Imported wall-mounted boilers are slightly more expensive than domestic ones, with a price of around 10,000 yuan.
3. Auxiliary materials:
insulation board , reflective film, leveling backfilling, heating valve, card star, etc. are all auxiliary materials for radiators. The cost of these auxiliary materials will not be very high, but it is also related to quality. Good quality will be more expensive, otherwise it will be cheaper.
4. Thermostatic controller :
Some users will not choose to install this, its main function is temperature control. When installing a thermostat, imported water pipes should be used because domestic water pipes do not support temperature control. Therefore, when installing radiators, we must clarify what configuration and pipes are used.
5. Labor cost:
1, aluminum-plastic pipe installation: 180 yuan/group, including: 2 six-point valves, 2 joints, aluminum-plastic pipes within 2 meters.
2. Aluminum-plastic pipe installation: 210 yuan/group, including: 2 1-inch valves, 2 connectors, aluminum-plastic pipes within 2 meters.
3. Pipeline series during heating: labor cost 60 yuan/group, including 2 6-minute aluminum-plastic pipe joints and aluminum-plastic pipes within one meter.
4. Old heating displacement and series heating installation: labor cost 80 yuan/group, material is practical and collected.
5, galvanized pipe installation (6 points of interface): 260 yuan/group, including: 2 valves, 2 scroll knots, 2 pipe fittings, and galvanized pipes within 2 meters.
Related common sense: Heating fee
Usually, users will use wall-mounted boilers to keep heating. The heat dissipation per square meter per unit time is 40w, and a house with a 100 square meter needs 10368* per month; the thermal efficiency of the wall-mounted boiler is calculated at 92%, and natural gas is consumed in January. It is about 316.8Nm3, and the cost required to calculate a 100 square meter house is 887 yuan. The monthly cost of
radiator is related to many factors, such as the system design and materials used when installing radiators; as well as radiator insulation and building insulation ; in addition, users' daily usage habits are also very important.
or above is the relevant content summarized by the editor of Jinqiu Aesthetic Radiator, "How much does it cost to install a radiator in 100 square meters?", I hope it will be helpful to everyone's lives. If you want to know more information, please pay more attention to Jin Flagship. Jin Flagship Brother will provide you with more comprehensive, detailed and updated information. If there are any shortcomings, please correct and submit them.
