. Friends who are preparing to customize cabinets must reserve 2 vents, which are practical and safe!
When decorating the kitchen, most of our friends will choose to design custom cabinets. We can customize cabinets based on our kitchen type and our height and daily lifestyle habits, so that it will be more convenient when used.
When customizing cabinets, you not only need to consider the boards used and the height of the cabinets, but also some relevant details.
If you plan to customize the cabinet, then remind everyone to reserve two vents in advance . This customized cabinet will not only be more practical, but also improve safety!
①Ventilation port of gas meter cabinet
The gas meter at home is generally installed in hanging cabinets or floor cabinets. Many friends have not considered the issue of venting ports in a direction when decorating, but they just think that the gas meter can be installed in the cabinet. In fact, when installing the gas meter, we need to reserve a vent next to the cabinet in advance.
Before, my home did not reserve gas meter vents when designing the cabinet. Later, when installing the gas meter, the installation master said that if there is no vent, the installation may not be completed.
According to current regulations, If we want to install the gas meter in the cabinet, then we must reserve the vents. If there is no vent, the installation cannot be completed.
In fact, this regulation has always been there, but it was relatively not so strict before. Even if there were no vents, some installation masters would install gas meters for us.
But now the relevant acceptance standards are becoming more and more stringent. If there is no vent, the installation will really not be completed. Moreover, it will be particularly inconvenient when using and inspecting natural gas in the subsequent use and inspection.
According to regulations, the size of the vent near the gas meter of cannot be less than 150 square centimeters . There are no special requirements for the position of the vent. You can choose to open the cabinet door, or you can choose to open the cabinet at the bottom or top of the hanging cabinet.
This is not only for the purpose of installing a gas meter, but also helps us reduce safety hazards.
In addition, everyone needs to pay attention to that in addition to reserve a vent next to the cabinet where the gas meter is installed, it is best to reserve a door that can be opened at any time when the gas meter is installed. Never leave the gas meter and valve out of the cabinet.
②Vent vents of the gas stove floor cabinet
In addition to reserve vents next to the cabinet where the gas meter is installed, we also need to reserve vents at the bottom of the floor cabinet where the gas stove is installed.
Now most gas stoves on the market are designed to have air intake. The air intake port of the gas stove needs to be hidden at the bottom of the gas stove. If we embed the gas stove into the cabinet, we need to reserve an air intake vent in advance, Otherwise, the flame of the gas stove cannot be fully burned.
Everyone knows that gas stove needs a certain amount of oxygen during the combustion process. If we install a gas stove with air inlet, we must reserve a ventilation port next to the cabinet to ensure the normal use of the gas stove.
Of course, in addition to the gas stove with lower intake, there are also some gas stoves with upper intake. The air intake port of this gas stove is located above, so even if we embed the gas stove in the cabinet, it will not affect the normal combustion of the gas stove.
, however, this kind of gas stove is relatively few, and the price is relatively high, and it is more beautiful after installation, and it is easy to have sanitary dead corners. Therefore, most friends still choose gas stoves with air intake at home. If the gas stove under
does not have a vent, then inadequate combustion will occur due to insufficient intake during the process of using the gas stove. This will not only cause a relatively small firepower, but also waste more gas and will smoke the bottom of the pot.
If you choose a gas stove with air intake at home, then be sure to reserve a vent in the cabinet at the bottom of the gas stove.
This not only makes the firepower more stable when used, but also makes it safer.
If you think it is not convenient to design a vent on the cabinet, can also choose to replace the cabinet at the bottom of the gas stove with a hollow cabinet door , so that air can also enter the cabinet.
Summary:
If you want to customize the cabinet, it is best to reserve vents in these two places, which not only facilitates use after moving in, but also reduces safety hazards and is safer. In addition to reserve vents, when customizing cabinets, you also need to consider the installation locations of range hood , water purifier and some other electrical appliances in advance, and then reserve sockets in a suitable location.
[If the picture is infringed, please send a private message to delete the manuscript]
