How to make a whole-house customized wardrobe look good? 99% of people will tell you to do "one course to the top". So, is there really no shortcomings in , which is sought after by everyone? What should you pay attention to when doing it?
In today’s article, I will summarize my whole house customization experience, give you a comprehensive analysis of the advantages and disadvantages of one door to the top wardrobe, and focus on how to ensure that the door to the top of your home is not stepped on. Pitfalls for :
1. The only advantage of getting to the top in one course is that
looks good! nice! nice! This is the only benefit of and .
Because the wardrobe door has been simplified to the minimum, if combined with the proper handling of the handle and edge sealing, it can ensure that the wardrobe has a strong integrity, and the cabinet door will not appear obtrusive after being closed, and can be more harmoniously integrated into the bedroom. Even in the entire home atmosphere.
2. Four major disadvantages of one course
1. Expensive!
The same board needs to be processed with a larger size original board from door to top, and the price is about twice as expensive as segmented . In addition, after adding transportation fees, the cost will be even higher.
2. Door panels are easily deformed
Of course, merchants will definitely tell you that the cabinet door will not deform after installing a straightener, but the truth is that no matter what brand, as long as they say this, they must be fooling you! Because the straightener can only delay , it is definitely better to install it than not to install it, but the straightener cannot fundamentally solve the problem of door panel deformation.
3. Cleaning is troublesome
Because the cabinet door from top to bottom cannot touch the ground, and there is usually a distance of about one centimeter. So when cleaning the bedroom, if you don’t open every door to clean, Then there is no way to clean the section under the closet door.
If you use a mop to mop the floor, the mopping will easily get to the lower edge of the cabinet door, which can easily stain the cabinet door.
4. It is not convenient to use
In fact, a door-to-top wardrobe is not as convenient to use as a segmented wardrobe. Because the number of doors is reduced, which means that the space inside a door is increased, there will often be problems with mutual interference between the clothes or bedding in the closet.
In actual design, the top layer of the wardrobe is usually used as a storage area for bedding, and bedding such as silk quilts, velvet quilts and cotton quilts, after being folded and placed in the wardrobe, often become Expansion causes the cabinet door to swell out every time it is opened. In severe cases, the cabinet door cannot even be closed. Even if it is closed, it is still tilted, which directly makes the entire wardrobe feel cheap.
5. Installation requirements are high
In order to ensure that the door-to-top wardrobe can be installed smoothly and achieve the desired effect, communication between the bricklayers, oil workers and cabinet makers must be done in the early stage. First, the size must be accurate; The second is to ensure that the ceiling is level, the floor is level, and the back wall and side walls should be perpendicular to the ground and to each other. If there is a problem in any of these aspects of , the final effect will be affected, ranging from obvious gaps to the direct friction between the cabinet door and the ceiling or floor.
3. 4 Suggestions for a perfect door without mistakes
1. Board Basics
The material characteristics of door panels are the main cause of door panel deformation. In order to ensure that this larger size wardrobe door does not deform, you cannot choose multi-layer board , ecological board and are easily deformed boards. These boards will definitely deform even if a straightener is added.
The boards more suitable for should be European pine board and particle board . In the past two years, some higher-end boards have been released, such as LSB and LVTT boards. The prices of these two types of boards are much more expensive. I will write a special article to introduce these two higher-quality boards later. For those who want to know more You can follow me first.
2. Be prepared.
First, the gypsum board on the top surface of must be level; Second, the ground must be leveled in the early stage, with an error not exceeding 5 mm; Third, the back and side walls of must be perpendicular to the ground. They must also be perpendicular to each other; the and plaster lines cannot pass through the area at the top of the cabinet, otherwise they will definitely "turn over"!
3. The sealing plate is embedded
The high probability of a door-to-top wardrobe overturning is on the sealing plate. Both the upper sealing plate and the bottom sealing plate must sit on the inside of the cabinet door and cannot be seen when the cabinet door is closed. Sealing the board ensures visual simplicity and coherence.
4. Handles are the key
The choice of handles is definitely the finishing touch to the overall appearance of the wardrobe! Once you choose the wrong handle, the appearance of the entire cabinet will be ruined. There are currently four recommended handle solutions: slender line handles, through-top handles, rebounders and milled groove handles .
Among these types of handles, has the best effect and is the most useful milled groove handle .
Well, the above is a guide on how to choose a top-notch customization for the whole house. Do you have any other questions about ? Let’s continue the exchange in the discussion forum!
I am a girl who knows how to shop, focusing on sharing practical decoration and shopping strategies. Follow me, don’t miss more interesting information!
