Nowadays, the existence of scaffolding has given everyone new ideas. People need to know more about the specific operations when choosing scaffolding. Scaffolding comes in many sizes, but many people do not know what the standard size of scaffolding is. In fact, there are certain

2024/06/0904:17:32 home 1793

Nowadays, the existence of scaffolding has given everyone new ideas. People need to know the specific operations when choosing scaffolding. Scaffolding comes in many sizes, but many people do not know what the standard size of scaffolding is. In fact, there are certain standards for size. In order to enable everyone to find the scaffolding that suits them, the editor of Jiuchen Building Materials has compiled relevant content here for your reference.

Nowadays, the existence of scaffolding has given everyone new ideas. People need to know more about the specific operations when choosing scaffolding. Scaffolding comes in many sizes, but many people do not know what the standard size of scaffolding is. In fact, there are certain - DayDayNews

1. What is the standard size of scaffolding? The height of
scaffolding is actually based on the height of the building plus the protection height, usually 1.2m. The length is determined by the perimeter of the building plus the width of the frame. Safety and portability should also be taken into consideration. consider.
2. What should you pay attention to when choosing scaffolding
1. In order to have sufficient carrying capacity, the support rods should meet the requirements of carrying capacity, and the elevation of the foundation bottom should be above 50-100mm;
2, cantilevered scaffolding , in order to ensure verticality Protective rings, protective devices should be installed in the gaps between the bottom of the scaffolding or each layer above the frame and the structure, so as to effectively prevent small objects such as internal steel bar heads, fasteners and concrete fasteners from falling and injuring people. It is strictly prohibited to use rebar . 16# I-beam should be used. A steel bar head larger than 25# should be welded 100mm away from the front section of the beam to fix the vertical pole.
In addition, in order to ensure the welding quality, all welds must be welded, spot welding is not allowed, and the steel bar head is 200mm higher than the I-beam. At the same time, the I-beam should be painted with yellow anti-rust paint, etc.
Through the brief introduction of the above content, do we have a better understanding of what the standard size of scaffolding is and what should be paid attention to when selecting scaffolding? If you encounter problems when using scaffolding or need new cantilever scaffolding , you can consult customer service online or call us. I hope this article will be helpful to you.

home Category Latest News