Since the birth of water heaters, people have never completely let go of their concerns about its safety. Although water heaters have grown into an indispensable mainstream home appliance in the long process of development, users' pursuit of safety and manufacturers' exploration of safety have not stopped.
The use of water heaters is related to the safety of family members. In addition to choosing qualified products from regular manufacturers, you should also try to pursue more comprehensive and updated safety protection designs. Equipped with Aucma new generation integrated water outlet and power-off technology, Aucma's new electric water heaters FCD-60B115, FCD-60B116, and FCD-60C203 will take you into the era of active security defense.
Which anti-leakage technology is stronger?
By comparison, you will know
When it comes to bathing safety, we have to mention the various anti-leakage technologies equipped with electric water heaters. Currently, electric water heaters on the market basically use three anti-leakage technologies: three-level power outage, anti-electricity wall, and water outlet power outage. These anti-leakage technologies have different principles and different safety protection effects.
[Three-level power-off technology] is to immediately disconnect the neutral line , live wire and ground wire when leakage occurs, achieving an effect similar to unplugging. This method has certain requirements for installation conditions, and a reliable grounding system and supporting sockets are required. At the same time, this protection method is a passive defense that first leaks electricity and then cuts off the power, and the safety still needs to be improved.
The more widely used [anti-electric wall technology] uses the " water resistance attenuation isolation method", which uses the resistance of the water itself and insulating materials to extend the waterway and increase the resistance in the water, so that the current during leakage is greatly increased. Attenuation, reducing the original 220V electricity to a range that the human body can bear to avoid causing personal injury. Anti-electricity wall technology has low cost and strong stability, but when encountering conditions such as high impurities in the water and corrosion of the magnesium rod , the discharge effect will still be compromised.
[Water outflow power-off technology] has a more active defense method. The water flow sensor will automatically cut off the power supply after sensing the water flow signal, and then restore the power supply after turning off the water. No need to repeatedly plug and unplug the power supply to achieve electricity-free washing, saving money. Go to a lot of trouble.
Integrated water outlet and power-off technology
"Water outlet and power-off" has evolved again
The active defense water outlet and power-off technology has already performed well in terms of safety. On this basis, Aucma has made a new upgrade to achieve The further evolution of water supply and power outage technology.
There are two problems with the traditional water outlet and power outage technology. First, the water outlet and power outage components adopt a separate design, which is complicated and inconvenient to install. It also weakens the sealing, causing certain water leakage risks; second, the water outlet and power outage need to be sensed when enough The power can only be cut off when the water flow is high, the response speed is slow and the safety is poor.
Aucma's new generation integrated water outlet power-off technology combines the Hall water flow sensing system and anti-electricity wall technology into one, highly integrated, easy to install and well sealed; upgraded to active dual defense, power is cut off when water comes out, and the response speed is fast , safe and guaranteed, easier to install, and longer lasting.
At the same time, the water heater is also equipped with leakage warning light . If there is an electrical leakage in the home, the anti-electricity wall indicator light will flash as an early warning to ensure the safety of your family's electricity use.
While ensuring the safety of electricity, these three water heaters also have thoughtful protection on water quality. The water heater runs html for 121 days and intelligently starts the sterilization mode , heats the water temperature to 80℃, keeps it warm for 5 minutes, and uses Ag+ silver ions to inhibit bacteria, effectively killing 99.99% of harmful bacteria. Users can also flexibly set the number of days according to their needs to ensure clean bathing for the whole family.
In addition, these three water heaters are equipped with the hot water remaining amount display function. The remaining hot water can be seen, making bathing more worry-free; it supports smart reservations and can be washed immediately at home to customize your bathing time; FCD- 60B116 is also equipped with Zhencai touch design. The Phantom large screen shows luxury, and the stylish color film IDM large screen touch control is clear at a glance. It embellishes the bathroom home decoration and is beautiful and practical.
Aucma electric water heater FCD-60B115, FCD-60B116, FCD-60C203 brings bathing into the era of active safety defense.
