How to clean stains in automatic washing machine ? How to clean and disassemble the automatic washing machine? How to thoroughly clean an automatic washing machine yourself?
Automatic washing machines have entered every household in recent years, bringing convenience to everyone. However, with this convenience, there are also some problems, such as certain stains after long-term use, which contaminates clothes and is harmful to health. How should such an automatic washing machine clean stains? What is the cleaning and disassembly method of an automatic washing machine? Today I will give you a detailed explanation, and then let’s see how you can thoroughly clean your automatic washing machine? Provide reference to good friends in need.
1. How to clean stains in an automatic washing machine. There are many ways to clean stains in an automatic washing machine. For example, cleaning can be achieved through the following methods:
1, washing machine cleaning agent
First, we open the outer cover of the automatic washing machine and put the Take out the dirty tank in the laundry bucket, and there will be many stains in it, which need to be cleaned independently. Then, pour the detergent we prepared in advance into the washing bucket, and then add cold water to the water level in the washing bucket. In order to make the detergent dissolve better, we can add some boiling water. Then, turn on the cleaning button of the washing machine, adjust the time to 5-8 minutes, and let the automatic washing machine start flipping and cleaning. After the time is up, soak the mixed detergent in the laundry bucket for 1 hour. After soaking, drain the waste water, then add half a can of cold water, turn over and clean again for 5-8 minutes, then drain the waste water, and then install the cleaned sewage tank back, and that's it.
2. Vinegar cleaning method
If you do not buy a washing machine cleaning agent, you can use existing resources, such as vinegar. First, soak the cotton towel in vinegar. After it is completely soaked, place it in the automatic washing machine, and then press the dehydration mode. The vinegar in the pure cotton towel can react with the stains in the washing machine to produce strong acid and alkali chemical reactions, so it can achieve the effect of sterilization and decontamination.
2. Automatic washing machine cleaning and disassembly methods
When the automatic washing machine has been used for a long time, the stains can no longer be removed by simple cleaning, so it is recommended to use the disassembly method to fully clean it. The washing machine cleaning and disassembly method is as follows:
1, prepare tools
Guangzhou Sun Yat-sen University No. Phillips screwdriver , adjustable wrench, towel, sink, etc.
2. Disassembly and assembly process
(1) First use a small screwdriver to remove the pulsator of the washing machine, and then use a good tool to loosen and remove the screws under the pulsator of the washing machine ;
( 2) Later, disassemble and install the four nuts in the middle frame of the automatic washing machine, and then pull the middle frame out from the front to the back, so that you can see the inner barrel of the washing machine;
(3) Next, remove all the nuts on the upper edge of the inner barrel. Once the screws are loosened and the outer cover is removed, the inner barrel can be pulled out.
3. Cleaning process
When cleaning the washing machine, you can use washing machine special cleaning fluid to soak the inner cylinder for about 30 minutes, and then use a soft towel or brush to clean the inner cylinder of the washing machine.
3. How can you thoroughly clean the washing machine by yourself?
1. If you want to completely clean the washing machine by yourself, you must first purchase a special detergent for automatic washing machines and .
2. First, add the purchased washing machine detergent according to the normal water level of the automatic washing machine, and operate the clothes according to the normal cleaning method.
3. Stop running for about 20 minutes. After soaking for two hours, run the washing machine again for 30 minutes, and then drain the dirty water from the drainage pipe . The function of soaking is to completely mix and dissolve the washing machine detergent and the stains in the bucket.
4. Open the washing machine detergent box, add the mixed scale cleaning agent solution, and run the automatic washing machine. After about half an hour, the scale cleaning liquid will flow out from the drainage pipe.
5. Then, add detergent to the scale cleaning solution and add the box. Repeat this several times, then clean with tap water and let it dry.
6. If you want to clean it more completely, you can fill the washing bucket with hot water of about 40℃, and then add 500 grams to 1 kilogram of sodium percarbonate . Sodium percarbonate has a strong effect of deodorizing and decontaminating. Then turn on the fully automatic washing machine and spin it for a while, then leave it for a while, and the stains hidden in the internal structure of the washing machine tank will flash to the surface. If you haven’t learned it yet, just save it and learn it slowly! Follow me to learn more life tips.
