In the field of electroplating technology, rack plating of electroplating lines generally uses hangers (the main body of the hanger is made of copper metal, the limbs and hooks are made of stainless steel, and the main body and limbs are made of organic insulating glue). During e

In the field of electroplating technology, rack plating for electroplating lines generally uses hangers (the main body of the hanger is made of copper metal, the limbs and hooks are made of stainless steel, and the main body and limbs are made of organic insulating glue). During electroplating, current is discharged between the hook tip of the hanger and the electroplated product to deposit the coating. Due to multi-layer electroplating, a layer of electroplating layer will be deposited on the hanger hook, which affects the conductivity between the hanger hook and the electroplated product. Therefore, it must be peeled off to make it conductive well. How to solve the above problems when

encounters them? The electrolytic stripping agent is specially used for rapid electrolytic stripping of stainless steel plating. The detachment speed is fast, and various plating layers such as copper, nickel, chromium, and zinc can be removed simultaneously. After the stripping is complete, the deplating can be automatically stopped without damaging the hanger. The working fluid is close to neutral and does not contain cyanide or other toxic substances. No toxic gases are released, the deplating is gentle, the operation is safe, and the wastewater treatment is simple; the working fluid is stable, and the main consumption is the loss caused by the working fluid. The dosage is small and the cost is low. It is not only suitable for manual operation but also for automatic line operation; it is very economical. It can also increase the service life of the hook.