The water dispenser is a good helper for us to drink water directly, but the filter of the water dispenser must be cleaned regularly, otherwise there will be a lot of bacteria. Today, what we want to know is the installation order of water dispenser filter element , come and see how water dispenser filter cleans .
The installation sequence of the water dispenser filter element
1. The installation order of the water dispenser filter element is PP cotton filter element, granular carbon filter element, compressed carbon filter element, RO membrane filter element, and rear carbon filter element, which must be operated in this order during installation. .
2. First of all, prepare the preliminary work to ensure smooth progress. Install the first-stage filter element 5UMPP cotton, remove the cover film with the 5UMPP cotton label, and then put the PP cotton on it, screw the filter bottle well, use the filter Tighten the filter bottle with a bottle wrench to avoid water seepage.
3, then install the second-stage filter element granular activated carbon, pay attention to the direction when installing, do not install it in reverse, put the gasket with the rubber ring on it upwards, insert it into the filter bottle cap, screw the filter bottle, and tighten it with the filter bottle wrench .
4, then install the third-stage filter element 1UMPP cotton, also remove the covering package, then insert the PP cotton into the filter bottle cap, screw the filter bottle, and tighten it with the filter bottle wrench.
How often should the water dispenser filter be replaced?
1. The water dispenser is a device that heats or cools bottled pure water or mineral water, which can be convenient for people to drink. Generally, bottled water is placed on the top of the machine and used together with bottled water. The filter element of the water dispenser filter can be 3- Change it every 6 months.
2. The first three stages of filtration, such as PP cotton and activated carbon, can be replaced every 3-6 months, and the RO reverse osmosis membrane can be replaced once a year. Frequent replacement of the first three stages can prolong the service life of the RO reverse osmosis membrane. Because the first three stages are relatively cheap, and the RO membrane is more expensive, and the ultrafiltration membrane can be removed and cleaned and used repeatedly.
3. The water dispenser needs to be placed in a cool and dry place indoors without direct sunlight. The back of the machine and the wall should be 20 cm away. Do not put foam or cardboard at the bottom, otherwise moisture may accumulate and cause electricity leakage. Do not place it next to the machine. Flammable and explosive items.
4. If you do not use cold water or hot water for a long time, the water dispenser with cooling and heating power switches can turn off its power switch first. The computer-controlled water dispenser can adjust the water temperature setting and turn off the cooling or heating function. , can save more electricity.
How to clean the filter element of the water dispenser?
1. First, separate the upper and lower sections of the filter element, and then rinse the upper filter element (ceramic) with clean tap water. At the same time, you can use a clean new toothbrush that has not been brushed to brush the surface of the filter element.
2. Fill the upper filter element with about half a pot of tap water, and then shake the filter element up and down vigorously several times to pour out the remaining water. So many operations can make the filter element pores unblocked.
3. Fill the lower filter element with tap water, pat the mouth up and down with the palm of the hand, let the lower filter element shake, and use tap water to clean the filter material. Repeat this several times until the tap water flowing from the lower filter element becomes clear.
4. Although the filter that comes with the water dispenser has a certain bactericidal effect, after long-term use, the filter element of the filter will be polluted by bacteria accumulated for a long time, so the water dispenser with a filter should be regularly Clean and, if necessary, replace the filter element. The above
is the relevant content of household water dispenser filter , I hope it can help everyone.
