Today is the decision of the fans. The editor’s favorite
"Audience Selection Session"
What happened is this: the editor posted an article about drawing appreciation
and then a friend from Jiangsu who is familiar with Feng Shui
made the internal layout of the house. Put forward an opinion
The matter is fermenting again. Another audience friend who saw the article
privately messaged the editor in the background:
So, for a two-story self-built house in a rural area,
what is generally good to do upstairs in the kitchen?
integrates various information, let’s take a look with the editor~
1, what is suitable for the second floor of the kitchen of a self-built house?
First, let’s analyze from the perspective of Feng Shui. As we all know, the Five Elements are an important principle of residential Feng Shui and the basis for house layout. The basic content of the Five Elements is: wood generates fire, fire generates earth, earth generates metal, metal generates water, and water generates wood. wood conquers earth , earth restrains water, water restrains fire, fire restrains metal, and metal restrains wood.
After reviewing the Five Elements principles, before figuring out the layout of functional areas such as kitchens and bedrooms, needs to clarify the Five Elements attributes of each functional area - the five elements in the living room are gold, the five elements in the study or corridor are wood, and the five elements in the bathroom are It belongs to water, the five elements in the kitchen belong to fire, and the five elements in the bedroom belong to earth.
Then, after clarifying the above two types of basic information, we can conduct analysis.
Since the kitchen belongs to fire and the bathroom belongs to water, and water and fire are in conflict with each other, the second floor of the kitchen cannot be used as a bathroom in . Moreover, generally speaking, the toilet and kitchen cannot share the same wall. In addition, based on the principle that fire overcomes metal, the second floor of the kitchen cannot be used as the living room . However, people generally do not arrange the living room on the second floor, hahaha~
. Since the daily use of the kitchen will produce noise, which will disturb the rest on the second floor, Feng Shui aside, from this aspect, the second floor of the kitchen cannot be used as a bedroom. of. For the same reason, study room is not suitable.
After excluding the above functional rooms, what is the second floor of the kitchen suitable for? In fact, public activity spaces and utility rooms are generally better choices . What do you think?
However, based on the current actual situation of rural house building, some friends seem to prefer building independent kitchens , that is, building the kitchen against the main exterior wall of the house. With such a layout, naturally there is no need to think about what to do on the second floor of the kitchen~
In addition to the above-mentioned private messages from friends
, the editor also received a private message from another friend
So the second party of today's "Audience Topic Selection Session" is
Regarding " structural column pouring method "
friends who are interested, let's take a look ~
2, what is the construction method of structural column pouring?
1, preparation before pouring. At the construction joint at the root of the structural column of , it is best to lay 5 cm thick cement mortar or alkali gravel concrete with the same mix ratio of concrete as before pouring.
2, pouring method . Unload the concrete onto the iron sheet and use a shovel to unload the concrete into the mold.
3, construction precautions :
(1) When pouring concrete structural columns, you need to insert the vibrating rod into the bottom of the column first, and then vibrate it to pour the concrete.
(2) Pour and vibrate in layers, and each layer of pouring should not exceed 60 cm.
(3) requires cutting and vibrating while tamping, and the pouring height usually does not exceed 1.5 meters.
4, concrete vibration . When pouring concrete, it is required to hit the formwork with a rubber hammer while pouring. At the same time, you need to pay attention to whether the formwork is deformed. If deformation occurs, it needs to be corrected at any time.
5. Protection and inspection at any time:
(1) When pouring concrete, attention should be paid to protecting the position of the steel bars and the waterproof structure of the exterior brick walls and exterior wall panels to prevent damage.
(2) At the same time, a dedicated person is required to check whether the formwork and steel bars are deformed or displaced; whether bolts and tie rods are loose or fallen off, etc. Once slurry leakage and other phenomena are discovered, special personnel should be assigned to perform maintenance.
6, smooth the surface . After vibrating the concrete of lintels and slab joints, it should be compacted and smoothed immediately with a wooden trowel. There should be no loose concrete on the surface.
7, concrete curing . Within 12 hours after the concrete is poured, the concrete needs to be covered and watered for curing. Water at least twice a day at room temperature, and the curing time should not be less than 7 days.
Well, today’s “Audience Topic Selection Session”
is over~
Dear audience friends, what do you want to see?
What policies or building knowledge do you want to know about?
Welcome to leave a message or private message to the editor
Everyone The more opinions and suggestions you have, the better~
