Apogee Symphony Desktop registration and installation guide

To use Apogee Symphony Desktop, you need to register the product, upgrade the sound card system firmware, and install the driver.

The following are the specific steps for Symphony Desktop registration and installation:

, first go to https://apogeedigital.com/support/symphony-desktop page to register the product, this step is very important. Both plug-ins and driver software included with Symphony Desktop must be registered before downloading.

, click the link

indicated by the arrows in the next two figures in turn, on the registration form page, first fill in the common email address here and then click the Submit button to submit.

, this step needs to fill in more information. First select the product and operating system version to be registered (select Symphony Desktop in the product column, and the operating system version can choose the latest system of Windows or Mac according to the situation), then:

) Enter the product serial number, on the packaging box and the sticker on the back of the body You can find

) Apogee is currently doing a Symphony Desktop promotion, after checking the mailbox, you can receive a discount code for purchasing all Apogee plugins for $99. (This promotion is arranged according to the manufacturer's promotion, and may be changed later)

) Prepare a photo of the purchase receipt or a screenshot of the Taobao transaction and upload it. After

is completed, click the Submit button to submit

. Later, you will receive three or two emails (depending on whether the 99 USD coupon is checked) in your registered mailbox, respectively 1) Driver download link; 2) The free ECS channel strip and Clearmountain's Space reverb plug-in activation code , which can be activated by filling in the form in the activation window that pops up after installing the plug-in and launching the DAW; 3) and an optional $99 coupon.In the driver download link email, directly click the corresponding operating system (macOS Installer or Windows Installer button) to download the corresponding driver installation package .

, Windows driver is zip file , Mac system is dmg file. Copy the SymphonyDesktopUpdate folder in the downloaded driver to the root directory of the Apogee U disk included in the package (the figure below takes Windows as an example). Note: needs to copy the entire folder to the root directory of the U disk, and cannot just copy the files in the folder alone. Otherwise Symphony Desktop will not recognize the upgrade file. Then push the USB stick out of the computer and plug it into the USB port on the back of Symphony Desktop.

, the following is the Symphony Desktop upgrade operation. First connect the power of Symphony Desktop, then press the big button to turn on the power.

Symphony Desktop will start flashing for about 30 seconds, and it will complete the boot and enter the system

.1 You may see two different interfaces depending on the factory time. If

is the No. 1 interface on the left, , don't do anything, wait patiently for a few seconds, and you will enter the operational upgrade guide (if is the No. 2 interface on the right, please skip to the corresponding operation steps in 8.2 )

) When the screen When Check for Update is displayed, click this button

) The system will automatically scan the available upgrade files, and an option to confirm the version of the upgrade file will appear, here click the YES button on the screen.

) and then the screen will prompt to re-confirm whether to upgrade, here again click YES

) and then officially enter the upgrade process, the screen pops up prompting that cannot plug and unplug the power connector at this time. At the same time, the upgrade progress is displayed in the form of progress bar . At this time, do not perform any operation and wait patiently for the progress bar to fill up.

) After the upgrade is completed, the system automatically enters the working state

.2 If the No. 2 interface on the right side of the figure below is displayed after booting, please upgrade as follows (Users on the No. 1 interface on the left, please skip this step and directly view the driver installation part) :

) Click on the little gear icon at the top left of the screen.

) Swipe left until the Update button appears, then tap the Update button.

) and then click the Check for Update button

) and click the Yes button

) At this point, Symphony Desktop will start to upgrade, as shown in the following figure. Pay attention to , please do not unplug the power of the sound card or pull out the U disk during the upgrade process.

) After the upgrade is complete, Symphony Desktop will flicker for a while, and then re-enter the operation interface, at which point the upgrade is complete.

, install the driver: The driver and plug-in installation are briefly described below.

As shown in the figure below, the Windows system can directly run the .exe file to install the driver of Symphony Desktop and the attached Apogee plug-in, and the operation of the MAC system is similar. During installation, Windows users can deselect Clearmountain’s Domain before installing.For MAC users, please do not install the Apogee FX plug-in and Clearmountain’s Domain plug-in if you have not purchased the Apogee full plug-in package, otherwise an activation reminder will be automatically detected every time you start DAW.

Windows installation package and installation interface