The new generation of APU was launched and installed several units for use as small hosts in the living room. Finally, a friend chose the ASRock DeskMini X300W barebone system (X300 is the version without WiFi, and X300W is the version with WiFi, collectively referred to below. X300 barebones) is placed in the living room. Several of its predecessors A300 have been installed before. As a perfect match for AMD under this size, it can not only meet the light office, but also has relatively good scalability. Let’s share it below.
configuration:
CPU AMD Ryzen 5 5600G
board / chassis / power ascore DeskMini X300W alignment system
heat AXP90-X47 Black
memory Apacer 16G*2 DDR4-3000 SO-DIMM NOX memory
SSD Seagate Seagate coolplay 510 FireCuda 510 SSD pp7p img 510 FireCuda 510 PCIe 3.0 1Tp _span3 pspan0 pspan0 pspan0 pimg For the mini, 330ml Watsons sparkling water contrast.
accessories
CPU
In March of this year,AMD announced the Ryzen Pro 5000 series of mobile processors. However, facing the OEM market at the time, it was announced on Computex 2021 that the Ryzen 5000G processor will be launched in the retail market. Until recently, I did not see the actual product. Fortunately, there is a retail version this time. However, unlike the previous generation of Ryzen 4000G APU processors, they were not sold in the retail market.
The outer packaging is still old style.
AMD Ryzen 5 5600G, using 7nm process, 6 cores and 12 threads, three-level cache 16MB, TDP thermal power consumption 65W.
family portrait, including 5600G body, radiator, manual, and a small sticker.
memory
DeskMini X300 supports SO-DIMM memory, so it can have such a small size. In order to make the memory speed and stability better, I directly choose silent Apacer’s NOX memory with 3000MHz frequency can be used. Actually, I know the name of this memory is because of the “NOX” game, but people who have played this game are probably close to 40...
One regular look.
hard disk
5600G only supports PCIe3.0,Therefore, the Seagate FireCuda 510, I have tossed a few pieces of FireCuda 510, which is quite good as a system disk.
heat dissipation
heat dissipation I chose Limin’s AXP90-X47 Black, 4*6mm AGHP anti-gravity heat pipe + re-welded heat pipe fins and a down-pressure radiator with a height of only 47mm.
Let’s come first with an unboxing animation.
black TL9015B fan has been installed from the factory, the height of the TL9015B fan is only 15mm, 2700RPM±10%, the maximum air volume can reach 42.58CFM, and the four corners are equipped with silicone damping design, the noise is only 22.4DBA .
LGA115X/AM4 backplane has been screwed together with the heat sink body before leaving the factory. From this angle, you can see the 4*6mm AGHP anti-gravity heat pipe, micro-carved copper base with protective sticker.
Classic blackening, nano-level paint film process.
0.5mm FIN process, the combined height of 47mm just reached the limit of X300 ( ASRock official logo is 46mm height limit,But AXP90-X47 Black can actually be installed. You need to use the X300's own back plate and need to change the short screws that Limin's own, and you need a little bit of dexterity when pushing in). This angle looks very regular.
host
The chassis selected this time is the ASRock DeskMini X300W barebones system. After all, my friend intends to save some trouble and also hopes to be more compact.
Let's first come with an unboxing animation.
X300 barebones front panel is the switch key and two status lights on the upper left, and I don’t know why there is an HDMI logo on the lower right. On the logo is a headphone and microphone interface, and a USB3.2 Gen1 Type. -A interface and a USB3.2 Gen1 Type-C interface.
X300 barebones chrysanthemum interface, from top to bottom, they are power port, DP, HDMI, there is also a VGA interface (privately thinking that DVI is better...), One each for USB3.2 Gen1 Type-A and USB2.0 Type-A, and one for Gigabit Ethernet. Pay attention to the screws at the four corners, you can remove the motherboard by unscrewing it.
X300 barebones has a large area of heat dissipation holes on the side and top of the small chassis. The mounting holes on the side of
are for installing the VESA adapter.With a suitable display, it can be combined with the X300 barebones system COS to create a simple all-in-one office combination for fun. Four foot pad grooves are reserved on the bottom and sides. This continues the design of the previous generation. The choice is how to place the machine.
X300 barebones can easily pull out the motherboard after removing 4 screws, but be careful to disconnect the data cable.
X300 barebones motherboard comes from the front, AM4 socket, supports Raven Ridge, Picasso, Renoir's highest TDP 65W processor, above is the 5-way power supply.
If you want to spy on the back of the X300 barebones motherboard, you need to remove the metal motherboard bracket. There is a place on the metal bracket. You can install two 2.5-inch hard drives. There is another one on the back of the motherboard. Ultra M.2 slot, support 2280, 2 SATA3 connectors are located near the edge.
X300 barebones power supply is 100-240V applicable, 19V==6.32A 120W output.
X300 barebone system accessories family portrait, including dual SATA cables, parts package (including rubber feet), WiFi antenna and Intel 3168 network card CD and manual.
comes with an AMD buckle heat sink.Although it is small, it has been coated with ready-made silicone grease .
installed
5600G, NOX memory and Coolwan 510 hard drive are in place.
How small is the motherboard, and you can estimate how small this AXP90-X47 radiator occupies.
My friend chose the black AXP90-X47 Black, but when I took the photo, I changed it to the white one, and the black version was used in the subsequent tests. However, it should be noted that the 47mm height of the AXP90-X47 Black has just reached the 46mm height limit. You need to use the X300's own backplane and need to exchange for the short screws that Limin's own, and you need a little bit of dexterity when pushing it in.
is completed once power on, and the BIOS interface is advanced to take a look.
Open XMP in the memory, and then install the system.
The whole machine is completed, let's take a beautiful photo, and compare the size with my small wall power.
test
CPU-Z to verify the body,AMD Ryzen 5 5600G, adopts 7nm process, 6 cores and 12 threads, three-level cache 16MB, TDP thermal power consumption 65W.
trot a test, compare AMD Ryzen 7 3700X.
GPU-Z take another look.
complete machine configuration list.
The entertainment master ran.
3DMARK CPU PROFILE test, maximum thread 5551, single thread 881.
3DMARK Time Spy test, score 1445, CPU score 6823, graphics card score 1269.
3DMARK Time Spy Extreme test, score 686, CPU score 3778, graphics card score 600.
3DMARK Fire Strike test,The score is 3721, the graphics card score is 4118, the physical score is 22307, and the composite score is 1252.
3DMARK Fire Strike Extreme test, score 1670, graphics card score 1685, physics score 22438, composite score 681.
3DMARK Fire Strike Ultra test, score 854, graphics card score 821, physics score 22310, composite score 400.
Tomb Raider: Shadow, 1080P resolution, set as above, average frame rate 19.
All beings are equal Odyssey, 1080P resolution, the lowest picture quality, the average frame rate is 27.
Far Cry 5, 1080P resolution, the lowest picture quality, and an average frame rate of 22.
1080P resolution, the lowest picture quality, and the frame rate fluctuates between 33 frames and 42 frames.
5600G is not overclocked, all by default,The power wall of the motherboard was not turned off, and the FPU ran for 12 minutes, full-core 4.29Ghz, room temperature 26°C-CPU temperature 85°C.
FPU and GPU dual bake for 17 minutes, full core 4.28Ghz, room temperature 26℃-CPU temperature 85℃. AXP90-X47 is no problem if it is suppressed. My friend can use it normally without extreme situations, so it is no problem if it is enough.
The above is all the contents of the AMD APU 5600G+ ASRock DeskMini X300W barebones host installation, finished~
.
