i3-10105F can use entry-level motherboards such as H410/H510. The radiator comes with a dual heat pipe or a downward pressure air-cooled radiator. Simply put, the i3-10105F is cheap and has high performance. It's okay, energy consumption and heat generation are not a problem. Among the products of the same price, its advantages are obvious. Of course, if you want to choose the shortcomings, it is only 4 cores and 8 threads. There is no way to satisfy some users for multithreading Performance requirements. and the Core i3 series using Comet Lake-S architecture is known to have three models, namely Core i3-10305/10105/10105F, this Core i3-10105F can be known from the name that it does not have a core display, and it should With 4 cores and 8 threads, with a base frequency of 3.7 GHz, it will replace the current Core i3-10100F.
For these users, then you can only look at second-hand processors such as AMD R5-1600. The configuration of 6 cores and 12 threads is believed to be better than i5-10105F. It will be stronger, but R5-1600 has a base frequency of 3.2GHz and a dynamic acceleration frequency of 3.6GHz. The frequency disadvantages are more obvious, so the multi-core performance will not be much stronger, and for most users, 4 cores 8 Threads are actually enough, and single-core performance will be more valued.
So if you are not holding a tossing mentality, but want to install an entry-level computer for one use, choosing i3-10105F is a pretty good choice, i3-10105F can be used with low graphics If you choose a mid-end dessert-level graphics card such as RTX3060, there will be no problem with the price of the bright machine card. Of course, the current graphics card price has not fallen.If you fall behind, choose a GTX 1650Super, and a 350W power supply is enough. This configuration is below 1080P resolution, most games can be played, and the price/performance ratio is quite good.
Core i3-10105F boxed version
Only one word is needed to describe i3-10105F, that is, "fragrant", and the two words are "very scented", there is no doubt about the three words "Very fragrant." Except that second-hand electronic waste will be somewhat competitive, mainstream CPUs on the market should not be able to find a second product that can replace this model. Against this backdrop, the old i3-10100F is rather pitted, the frequency is low, and the price is more expensive. The current price of an i3-10105F bulk film is concentrated around 525 yuan, which is equivalent to only 1/3 of the price to enjoy the happiness of the seventh-generation flagship i7-7700K.
i3-10105F belongs to the CometLake-Refresh series. To put it bluntly, it is the 10th generation refurbished booster vest. It is simply to increase the frequency of 0.1GHz on the basis of the i3-10100F, but the boxed version of the processor has been switched to The packaging style of the 11th generation is somewhat confusing. Because it is still based on the 10th generation architecture design, it can also be smoothly lit on the low-end 400 series motherboards such as H410/B460, and it does not pick the motherboard at all.
Core i3-10105F boxed version of the radiator
Because we generally only pay attention to the bulk of the i3, seldom talk about the box, so netizens may not know, i3-10105F box The matched radiator is actually the same full blackened + copper core radiator as the 10th generation i7/i9 and the 11th generation series (the 11th generation started from the i5-11400F), which is forced to improve, Intel is also more Conscience.But like the Pentium G6405, i3-10100F, i5-10400F, these are still the original pure aluminum radiators, which are also sufficient. This pure blackened radiator can be bought from Xianyu, and it ranges from 30-50 yuan.
[2] Recommended configuration
As the price of i3 gradually stabilizes, the price of the scattered CPU package given by Taobao sellers is also relatively affordable, such as here HVS board U kit can be purchased for only 888 yuan. Because i3 has very little heat, you can match it with an overclocked three-Q version of Green Snake for only 20 yuan or a red sea mini with dual heat pipes.
ASRock H470M-HVS uses the H470 chipset, but because this board is designed to clear the H470 inventory, it completely uses the H410M-HVS PCB solution, and the actual function is no different from H410. The motherboard uses 4+1 phase power supply, which can meet the stable operation of processors such as i5-10400F/10500. The expansion interface includes 4 USB 3.0 (2 rear + 2 front), 4 SATAIII, due to positioning reasons, the motherboard does not provide M.2 interface, so readers are requested to choose a conventional SATA interface solid state drive.
H470M-HVS integrates Realtek RTL8111H entry-level Gigabit network card and ALC897 mainstream sound card. Apart from the chipset difference, this board has two differences from H410M-HVS. One is that the sound card is changed from the previous generation ALC887 to the current popular ALC897, and the other is because the chipset has become more advanced, so SATA supports the whole series. RAID mode (this is a characteristic of the H470 chipset itself), neither of which is of much use to ordinary consumers.
discrete graphics card may be a key factor in reducing costs,Because the i3-10105F with its own UHD630 core graphics card is 200 more expensive, you only need to buy a second-hand camera card with a price of less than 200 yuan to save your budget. Like AMD HD5450, HD6450, HD7350, HD7450, R5-235 (HD7350 is the renamed vest of HD5450, HD7450 is the renamed vest of HD6450, R5-235 is the renamed overclocked version of HD7450), etc. or NVIDIA camp GT520, GT610, GT705 or Geforce 505, 605, etc. are all available, and the price is around 50 yuan. R5-235 is more recommended in the near future. You can also choose other graphics cards with better performance to be able to run some mainstream online games. It should be noted that when buying a graphics card, it is recommended to pay attention to the following display output ports, which must be matched with your own monitor, otherwise you will have to buy an adapter!
The power consumption of these bright machine cards is generally about 30W, which is very energy-efficient. The overall full-load power consumption of the configuration is 80W-120W. It is recommended to use a power supply with a rated power above 180W. The Jinhetian 480GT is selected here. It is 300W. In the future, you can install and upgrade the independent graphics card of GTX1650 level by yourself.
One. Graphics card part
N card: Without too much prejudice and ignoring money, except for flagships such as RTX2080ti and Titan series, it is recommended to buy the public version. The public version card is Lao Huang’s own Founders Edition, which has a good design and comes with faith. What is the beggar version? It is the cheap models in the same series of products of various non-public brands. These cards generally have a slightly lower silent frequency and a slightly reduced heat dissipation module. However, it is impossible to touch the butt of the previous card in view of the next level of overclocking. Why don't you buy a cooling module and upgrade your graphics card to a higher level? Of course, I understand that some friends have a hobby of non-flagship card workmanship, fan silence and lighting effects. This group of friends can be regarded as the part of the group that ignores money to a certain extent.As for the flagship card, I suggest you take a look at the 2080ti Hall of Fame Big Eagle and the Magic Dragon, which one is better to choose.
Regarding performance, game cores like lol can run casually, so you can look at your own budget. It is easy for Overwatch to have a stable minimum image quality of 60fps at 1080p resolution, 1050 level is good (not to push second-hand cards). If you want a stable minimum of 144, 1660ti is basically the same (in fact, 1066 is fine). If you want to eat chicken, it is recommended to start at 1066, and high-end games such as Tomb Raider, Assassin's Creed and other large-scale stand-alone games. The higher the graphics card, the better, depending on the quality of course. In 2K resolution, the above situation can be upgraded to 1 to 2 gears. (FPS games really don’t open the high picture, which will affect the shooting and you can’t care about enjoying the scenery. Players of the exquisitely crafted process breakthrough game are pursuing the quality of the picture. There is nothing wrong with it).
A card: There are not many A cards left in the domestic market, mainly the low-end positioning rx580 2048sp (4g and 8g versions), rx580 and rx590, and a Radeon7 paired with 2080. Once Lao Huang's gtx1660ti and 1660 are released, the basic purchase value of 580 and 590 is not great. Of course, A card lovers can buy them. After all, these two cards are better than 1066. As for the 2048sp version of the 580, it is the most cost-effective card at the price of 1,000 yuan, comparable to the performance of the 1063, and only sells for the price of 1050ti. The most high-end Radium 7 suggests that if you have so much budget, you should give priority to 2080. I really like the A card or I am afraid of the screen before considering the A card. By the way, except for some of Tencent's games that are still very black, the others don't seem to be that serious anymore?
Generally speaking, if you make a cost-effective ranking in terms of performance and price, I think rx584 rtx2080 is better, followed by 2060 1660ti and 1660. For me, rtx2070 is a bit embarrassing, but it is not impossible to buy, because If the game you play can use light chase and dlss, then the performance of 2060 is actually not good, it is recommended to start with 2070. Again,The rich, please ignore the price-performance ratio, just choose the 2080ti that you think is the most beautiful.
II. CPU and motherboard part
Don’t worry about the issue of fragmentation. Small workshops can’t make something as high-tech as CPU. Of course, if you are really worried about the need for warranty in the future, please box it on JD.com.
For a "smelly playing game", I actually don't think there are too many CPU choices. If you are not interested in overclocking , then start with G5400 i3-8100, i5-9400F, i5-9600k, i7-9700k, and i9-9900k. After the graphics card is selected, just choose a U within your budget. In theory, i5 -9400F can even be matched with RTX2080, so I suggest players with a budget of 4000-8000 can even choose this U without thinking. 9400F is approximately equal to 8500 castrated by the independent display, the performance is stronger than 8400, the bulk price is 100 yuan cheaper, as long as you use it with the independent display, don't you buy this cost-effective? ! There are still three U with k for players who don't overclock, because these three models are enough to play most games silently. At present, 99% of games are still optimized for single and double quad-core, so the six-core processor is definitely enough, that is to say, starting from 9400F, the CPU will basically not bring any bottleneck to the graphics card. Avoid hyperthreading as much as possible. If you don't need it, there are side effects. After all, 9900k ultra 5g has to turn off Hyper-Threading to be considered the strongest game U, and 9400F is enough for average players. The A’s processor is Ryzen5 2600. I don’t want to recommend anything else. The silent frequency is enough. Xiaochao can catch up with 2600x. The game experience is basically the same as that of 8400. In view of some inherent disadvantages, it is definitely not as good as Intel for playing games, but unless you Continue to use the detection software to count the number of frames, otherwise you will generally not experience it.
for overclocking (you can search for which games are more CPU-friendly, otherwise the overclocking will not benefit much),8600k, 9700k, 9900k, and Ryzen5 2600. Overclocking is a technical job but also a costly job. It requires not only a better motherboard power supply but also a better cooling fan, and the memory also wants to exceed, and then add money. For budgets above 8000, you can consider 8600k. 8600k currently looks better than 9600k. It is not too difficult to exceed 5g. It is directly top-notch gaming CPU. 9700k and 9900k will not say much. Consider budgets above 1w and 2w. With a budget of 6000, I want to learn overclocking. Welcome to r5 2600!
CPU and the motherboard are discussed together. If you don’t overclock, the 9400F is equipped with a B360 board. Note that the memory frequency of this board can only support 2666. If you are playing games such as chicken, which is also sensitive to memory frequency, you can consider z370. Even if the high-end 86k 96k 97k is not overclocked, it is recommended to start at least z370, and if it is 99k, it is recommended to go directly to the flagship z390. Of course, U who is not super can choose z370 a little bit, Xiaochao chooses the end, Dachao directly z390. If you choose AU, which is 2600, you can use B450 or X370, but B450 is not overclocked. Although B450 also supports overclocking, if you want to exceed 2600x and choose x370, the power supply part will generally be stable.
3. The solid state part
ranks the solid state in front of the memory because I think the impact of the solid state drive on the loading speed of the game is actually easier to detect than the game performance improvement brought by the high frequency memory. This is a very gaming experience. An important part. When Overwatch first came out, I could only play with a broken laptop. At that time, I loaded it into the hero selection interface for a long time and I couldn't see the character's avatar. After entering the map, I often only saw my gun but not my body. .
Of course,After the solid state is almost reaching a certain level, the gap will not be obvious. For example, can the black disk and 970evo feel a big difference in daily use experience? I don't think so. The actual solid-state gap of these high-end NVME protocols is reflected in the copy speed of large files. In daily use, it is difficult to put too much pressure on their cache area, but you have to place a few on the 256g installed disk. If a large-scale stand-alone game uses it as a red plate, then I have nothing to say.
Regarding the issue of particles, I don’t think most stinky gamers need to know so much. In fact, QLC TLC or the price of the same brand can be used to know what is low-end and high-end, and then appropriately estimate that you are right. If you need capacity and budget, just buy it.
My opinion is that the mainstream price 8000 generally uses a 256g solid state with a 1T machine. The solid state contains the system and the most commonly played games and the software that cares about the startup speed. Photos, music, movies, and games that are not often played are stored in the 1T machine. No matter how high the budget is, if the money in hand is not enough to add a graphics card, then increase the capacity of the system solid state disk. To be honest, high-end solid state such as Samsung 970evo must have 1T to play its true strength.
If you want to insert multiple solid state or multiple SATA disks, pay attention to whether your motherboard slots and interfaces are enough.
IV. Memory section
The memory frequency is now being supported higher and higher. In the past, the 8g ddr4 2400 sliver was so expensive, and now there are many types of 4266. However, the enhancement of high-frequency memory to the game experience is actually incomparable with the graphics card, and the high memory frequency will lead to an unavoidable increase in timing. I don’t understand the mechanism so much. Of course, there are also a small number of games such as chicken. The memory frequency is more sensitive,You can consider increasing the memory to a frequency above 3000. The compatibility issue is also mentioned in the previous motherboard. If the most mainstream 9400F with B360 chipset motherboard, it can only support the frequency of 2666. If you want to play high frequency, please go to z370.
How much memory can be bought, 8g is enough, 16g is close to the future, and then a lot of money. Dual-channel may affect the gaming experience more than the memory frequency. If some friends choose a slightly low-end AU, it is recommended to buy a dual 4g group dual-channel when the budget is insufficient. The most mainstream idea is to have dual 8g groups and dual channels. If the budget is tight, you can take one to add to the graphics card. The 8g memory of 300 to 400 yuan is actually a gap of 1066-1660ti-2060. This memory has absolutely no impact. The effect of upgrading the graphics card by one gear is obvious, and it will be fine if you have spare money in the future. Changing the graphics card can be a lot of trouble.
If you want to insert more memory, also pay attention to whether your motherboard has enough memory slots.
Five. The heat dissipation part
split is a high-end DIYer toy, let’s not talk about it. Regarding air-cooling and integrated water-cooling, basically the same price is air-cooled and water-cooled. But because the excellent air-cooling may be bulky, you should pay attention to whether it can match the chassis you choose, and the water-cooling still leaks. It is generally recommended that a non-overclocked U brainless T400i like 9400F is just fine, and the Donghai X6 Red Sea mini is not unusable, but the power is less than 100W, which is very good. If you have 2600, you can get a scythe and red rabbit horse. If you have friends who play games and do live broadcasts and need to buy 2700 and 8700k 9700k U, then it is recommended to start with Dashuang Tower and Cooler Master Ice God 240. If you don't overclock, the fan inside the case is optional.
For overclocking, I think everyone in overclockers should know what heat dissipation pressure, U, and temperature performance are.And to play overclocking money is to sprinkle water, and there are a lot of reviews for you to see, I will not be ugly. Here’s a word about AU’s boxed radiator. It’s pretty good-looking, and the workmanship is better than IU . There are many people who recommend it, but I feel that the original heat sink is still somewhat hotter. , Daily use of light games is okay, if the load is high, for example, the game will open more video clips to open live broadcasts, etc., then the frequency will be reduced, it is recommended to buy a better heat dissipation. For overclocking, the case fan can be installed more if you have money, the air duct is healthy, and the temperature is better.
VI. Power supply part
This is the most unshrinkable part! This is the most unshrinkable part! This is the most unshrinkable part! The important words are said three times. It is recommended that JD.com buy the parts that are cheaper, or which parts are particularly concerned about the warranty, then JD.com buys them. There is basically no good power supply below 450W, and the conversion rate is the highest when the load is 50%. Give a Cooler Master GX450 brother, the JD promotion price is only 279, all Japanese capacitors 5 years warranty, brother! If you really want to shrink, you will get 450 Bronze Emperor. The module is not so important whether it is a module, but generally the full module is relatively high-end, and the important thing is the Japanese capacitor and a few years of warranty. Safety is the top priority. It is too much for the benefit of using boom. This is the most important part of the whole machine. It provides power to every position of the whole computer. One is to buy enough wattage, and the other is to buy a good quality power supply.
Generally, it is recommended that you briefly understand the TDP of your CPU and graphics card. After determining these two core components, determine the power supply, and just add and multiply the upper limit of the power consumption of the two by 1.5~2.5. For example, 9400F presses 80W (some boards can be counted as 95W with high voltage), 1660ti 135W, which adds up to more than 200 points.In fact, three or four hundred watts is enough, but because the power quality is excellent at 450W, the GX450 is stable. Others are 150W with K with 6 cores (180 overclocking), 215W with K with 8 cores (260 overclocking), and 2600X with 120W~150W. In terms of graphics card, 1066 is 135W, 2060 is 190W, 2070 is 210W, 2080 is 280W, 2080ti320W, Radium 7 has 360W and so on.
In the end, there is nothing to say about the chassis. Pay attention to the size of the motherboard. The large chassis is backward compatible, but the small chassis will definitely not fit the big motherboard. In addition, the height limit of the radiator, the fan position, the hard disk position, the graphics card insertion method and the water cooling row support are all influencing factors, but everyone's main desire to buy still comes from the appearance.
The picture in the article recommends some computer accessories that I pay more attention to. The price changes at any time so the price is not listed. You can check it out. I will not write the specific configuration list, but it is a simple permutation and combination. That's it.
finally divide the core configuration roughly based on the price range:
The current price range changes, the price is for reference only
3000-6000 price i3 8100/i5 9400F/R5 2048 2600+ GTX1660/GTX1660ti/RX580/RX590
7000-8000 price i5 9400F+RTX2060
9000-12000 price i5 9400F/i5 8600k+RTX2070_span_span 9span_i5 20sp 9span_span_span 9700 _span_span 9700 _span 1 i7 9700k/i9 9900k+RTX2080ti of 20000+
pay attention to the second product bear,Learn more about computer assembly and accessories performance and price
.
