The "high, rich and handsome" in the brick car, the gearbox is worth more than 60,000, take you to see Hyundai Chuanghu heavy truck

According to the acceleration of urban construction and development, the demand for building materials in infrastructure projects has also continued to increase. In the early days, dump trucks were used to transport materials. Many people later found that the capacity was stretched due to small vehicles.

During 2015-2016, many local car owners chose to purchase trailers for operation. At this time, the carrying capacity directly doubled. Previously, two small self-unloading goods were required, but now one trailer is directly handled; Therefore, in the following years, the situation of more cars and less goods often appeared, and the decline in freight rates has become the norm.

Although the freight rate is not very prosperous, it can't stop the desire of all car owners to buy new cars. Among them, there are many high-end heavy trucks. Today, we found a domestic only Korean brand truck in the brick factory, which is also a joint venture heavy truck. It is Hyundai Chuanghu. There are not many opportunities to see

due to its inventory. Besides, if you see such a high-end heavy truck in the brick kiln, it is easy to be attracted by its appearance. Next, let’s explore this joint venture with everyone. What are the inherent advantages of branded trucks?

Vehicle introduction

After communicating with the owner, it was learned that this Hyundai Chuanghu is a short-distance line with a 13-meter flatbed trailer. It mainly transports bagged cement and packing bricks. Other bulk cargoes will also be picked up. When

talked about this car, there was an episode in the middle. When I first bought it, it was towing a bulk cement tanker. After half a year of operation, due to insufficient supply and unable to support the car loan, I replaced this 13-meter flatbed truck. The advantage of flatbed trucks lies in the variety of cargoes that can be carried, but they are still heavy cargo transportation, which also tests the quality of the vehicles.

This Hyundai Chuanghu XCIENT heavy truck is equipped with a Sichuan Hyundai D6CF44E5 engine with a displacement of 12.742L, a maximum horsepower of 440, a maximum output of 324KW and a torque of 2000Nm. It is matched with a Dymos T180S12 gearbox and has 12 forward gears. Bit, 2 reverse gears. According to the owner’s description, this gearbox is worth more than RMB 60,000, which can be considered as a joint venture car; the rear axle is a two-axle single-stage reduction axle with a load of 18000kg, with a speed ratio of 3.667; it uses a high-top row and a half. In the cab, the weight of the vehicle is about 8.8 tons, and the driving form is 6X4.

Appearance introduction

The front face of Hyundai Chuanghu adopts a stepped design language with a layered sense, and the entire air intake network is extraordinarily domineering. The modern logo shape is huge and highly recognizable; Chuanghu is added above. The English letters of, and the spoilers on both sides make the front face of the entire cab full of murderous, very sporty. The shape of the bumper part of

is blade-shaped, which echoes the corners of the cab. The shape of the car lights is very sharp, and it has the function of daytime running lights. The middle part is a honeycomb-type net with a large area and non-slip feet are set on both sides. The pedal is convenient for the driver to maintain and clean the front face of the vehicle. However,

has a disadvantage that the bumper has a low opening, which is suitable for high-speed logistics models, and it is easy to scratch the bottom when entering the construction site. The

rear-view mirror shell is designed in the same color as the body, with a sense of class. The top of the high-roof cab is equipped with modern English letters and is equipped with an air horn. It can be distinguished from so many English that this is a joint venture model. I really love this look. The lines on the driving side of

are still very lethal. There are so many lines at the door that extend along with the front face, which also brings a lot of domineering texture to the whole side. The decal of Chuanghu P440 also confirms its inner power to the outside world. .

One of the things worth mentioning is that the sleeper has closed sides without side windows. A toolbox is opened under the sleeper. This design is practical. The

cab adopts a three-stage boarding pedal, which is fully enclosed from the second level, which can effectively prevent dust from entering the cab, and the sealing of the entire vehicle is also very good, which is beneficial to maintain the vehicle The cleanliness of the interior; the quasi-flat floor cab is equipped with a four-point suspension airbag, with an inner clear height of 1895MM, and the driving space is very spacious.

is equipped with a raised air deflector behind the cab, which is common in high-end heavy trucksThe configuration can use the principle of aerodynamics to reduce the resistance of the vehicle, which is very helpful to save fuel consumption. The

400L capacity fuel tank can fully meet the short- and medium-distance driving of 800 kilometers back and forth. Generally, the fuel is refueled once for each round trip, which saves the time to find a gas station in the middle. The front part of the

fuel tank is a finely shaped exhaust pipe. The upper part is equipped with a heat insulation panel and a modern car logo. A canvas fender is installed on the front of the trailer to prevent water splashes from the rear wheels when driving. , The cleanliness of the chassis of the vehicle is maintained well and looks very comfortable. The layout of the chassis on the left side of the

vehicle is relatively compact. The urea tank is set at the rear of the front of the car, followed by the air reservoir and the battery. It is worth mentioning that a bracket is installed at the front, which can be used as a pedal or as a pedal Playing a protective role is a design that kills two birds with one stone. A tarp frame is installed on the front of the

trailer, which is used for folding and placing the tarp, which is strong and practical.

has a local feature here. Due to the need for forklifts to unload coal, all 13-meter flatbed trucks have changed the column of the side plate to a movable type, which is convenient for daily use. It is much more convenient than plugging and plugging one by one. At the side door is a very tiring thing.

Due to coal pulling, the side plates on both sides are prone to expand outward, so adjustment and resetting will be carried out every six months. The shape of the tail of the

trailer is very straightforward. After the owner introduced that after driving a powder tanker, he suddenly switched to a 13-meter flat-panel, and instantly felt very uncomfortable.

Due to the long length of the vehicle, the rear sight is very bad. When reversing on the construction site, the exhaust pipe blows up the dust. The rear sight is even worse. It is often necessary to run back and forth to get out of the car. The bumper was deformed by the top, and it is now corrected back; later, I consider installing a reversing image.

Interior introduction

When it comes to the interior part, we must first mention the cab with a flat floor. The space is really very spacious. Without the raised platform in the middle, you can stand up and move around in the cab at ordinary times. Several small storage boxes are placed, and the floor mats are also convenient for daily cleaning.

is a short-distance driving, so you only need to use the sleeper on the bottom floor, which can meet the daily rest when waiting for goods.

would like to compliment Chuanghu’s seat. The overall texture is very thick, and the comfort of long-distance driving is guaranteed. With the four-point suspension cab and the main driving airbag seat, it is simply sitting on an air cushion. One word "soft". The layout of the center console of

is biased towards the main driver's side. This design is also convenient for the driver to control. For example, the radio, air-conditioning control panel, and parking brake are all placed above the center console. The cup holder and storage trough. The owner of

installed a parking air conditioner above the co-pilot, and there are also curtains, which can keep the light and environment comfortable in the car when resting at night, and will no longer be afraid of rest due to the influence of the hot summer.

Here I want to mention this Dymos 12-speed gearbox, which uses the structure of the front and rear auxiliary gearboxes, and the control method is different from the ordinary 12-speed gearbox.

remember that this design is somewhat similar to the gearbox of Valin Hanma in my impression. Many drivers will not be used to it at first. Judging from the wear of the handle, this owner is also a person who likes to grip the handle.

Chuanghu’s steering wheel uses a four-frame design, which feels a bit similar to the style of a modern car. It is equipped with multi-function buttons on the top to control the LCD screen on the dashboard. The overall texture and damping are very good. exquisite.

is equipped with many storage compartments with a cover and a large capacity on the top of the vehicle, underneath is a huge sun visor, and even the side is also equipped with a sun visor. At the top of

is a small sunroof that can be opened and closed. It is relatively easy to open and close. However, in the face of dusty environment, the probability of opening is not high at ordinary times, but this series of configurations shows that the high-end joint venture models are in the cab Advantages in design.

Summary

After understanding Chuanghu, you can basically get a good conclusion, whether it is in appearance, power, interior, it is a model with excellent product performance. (Text/card number: Truck)