UG
UG NX After the NX12.0 version, the last version of UG NX 2019 was released, version number NX1847, which will be the final version of NX. The last version does not mean that it will not be updated, but only for this version, which is more convenient for everyone to use. UG NX 2019 Final Edition is a very professional and powerful 3D production software, which is widely used in mold design, product design, industrial design and other fields. The new version of UG NX 2019 is NX1847. Everyone will ask, why is it called NX1847 instead of NX2019? This 1847 has a special meaning for Siemens , because the German Siemens Group was founded in 1847, which is very meaningful. Starting from the NX1847 version, online upgrades will be adopted, and offline upgrade packages will also be provided, and you can freely set whether to enable automatic updates in the software, so you don't need to worry. The update time is that there will be minor updates every two months, and major updates every six months, just like the difference between the current major patch and the MP minor patch.
UG NX compared with the previous version, the biggest change is that the lower version of NX can open the files of the higher version of NX. Before the NX12 version, it is not feasible, because the lower version software cannot open new files in the higher version file. Function and logic, and this new version will improve this status quo. If the lower version opens the file of the higher version, the data can be read. The functions of the lower version of NX can be read and used normally. If it is a new function of the higher version of NX, it can be opened and read, but cannot be edited. This improvement is so convenient, the data is compatible with each other!
UG which version is the most stable is the concern of many people.
Many people think that the higher the UG software version, the worse the stability.So is this the case? There are indeed more problems with the higher version. But it is not as exaggerated as you said, and it often crashes. It may be that your NX software parameter settings are confusing, causing the software to not run normally. In this case, you can try UG to restore the factory settings.
In addition, the lower version of UG has relatively few functions, and there are not many integrated integrated software integrated by Siemens, so the size is small and the software runs smoothly. In the case that the UG software has been updated all the time, your computer hardware has not been updated for a long time, and the hardware cannot keep up, resulting in the unstable operation of the UG software. Many people will also think that this is a BUG problem of the UG software itself. superior.
Next, which version of the UG version is the most stable?
This is a false proposition. In fact, each version is similar. Do you say that NX12.0 is unstable? In fact, many people think that NX12.0 is very stable, and some people think that each version is unstable.
Starting from version UG10.0, the new version no longer supports 32-bit systems and XP systems, and can only be installed on 64-bit win7 , win8 and win10 systems. And the biggest change of UG10.0 is: fully support Chinese name and Chinese path; at the same time, new aviation design options, new creative shaping, new offset 3D curve, new drawing section line command, trimming and extending commands are divided into two parts. It is a brand-new start to change to a 64-bit system, and the interface supports Chinese names and Chinese paths. If the computer configuration is low, then sacrifice the higher version with more functions to obtain a stable and smooth user experience. UG NX10.3.5 is a very good choice.
If you can configure it and love to toss, you can always install the latest version. It is recommended to upgrade to the latest patch of the current UG version, so that basically every version is relatively good. Take NX12.0 as an example. When programming, the blank cannot select the facet body.This is very uncomfortable for those who need to choose a facet body as a blank during CNC programming, and they feel that their work is troubled, so you have to continue to upgrade to the NX12.0.2.9 MP14 version, which is to play the MP patch. , upgrade to the highest patch of the NX12.0 series, so that's OK.
What is the price of genuine UG?
This question is rarely mentioned, because the price of UG is not close to the people, it is a huge software, and the price is calculated according to the module. In this way, there should be millions of modules installed on all modules. I participated in the designer training class organized by our local government more than 20 years ago and learned CAXA. Everyone knows that UG is a good thing, but at this price.
.
