cyclone dust collector is a machine that uses a rotating impeller to accelerate dust-containing gas and throw it toward the surroundings. Cyclone dust collector is now considered a relatively common cooling dust collector . It has multiple names, such as Shakron dust collector, cooling dust collector, single-tube dust collector, etc. You can see through the name of dust collector , which functions it has. Cyclone dust collector is suitable for large-particle dust conditions. It can effectively reduce the impact of large-particle dust on the bag dust collector, thereby increasing the service life of the bag dust collector.
cyclone dust collector
It consists of intake pipe , deflector, baffle (or shield) and other components. When the fan is operating normally, air enters the box through the air inlet. Due to the inertia and diffusion of the airflow, a part of the large particle dust in the airflow is separated by inertial force and falls directly into the ash bucket; another part of the small particle dust enters the upper cleaning room or settlement room of the filter bag chamber with the air flow, encounters thicker dust particles, concentrates on the outer surface of the filter bag (called the filter layer), and discharges clean gas through the filter bag through the box to the air outlet.
cyclone dust collector
In order to prevent dust from clogging the holes and gaps of the filter bag, causing the patch bag to be pasted, increase resistance, reduce efficiency, and even damage the equipment, filter materials need to be removed regularly to remove dust from the filter bag. The resistance of the cyclone dust collector is low. During the air volume calculation process, the wind resistance of the cyclone dust collector can be slightly provided. The core data can be placed on the bag dust collector behind.
cyclone dust collector
cyclone dust collector mainly consists of a shell, a cone and screw conveyor . The inner wall of the shell is coated with performance-stabilizing materials to reduce wear; the cylindrical channel in the cone is called a gray discharge port; the screw conveyor is installed below the gray discharge port and sends the collected fine material to the central feed pipe. The bypass flue is generally used to connect the fan and the air duct to reduce the resistance loss of the equipment and increase the air volume of the treatment.
