The elements that interfere with the quality of welding joints of the medium frequency welding machine are of many levels, including welding joint design, material characteristics, process methods selection, equipment stability and stability, and even welder operation level.
There are the following ways to improve the quality of spot welding heads:
1. Improve welding equipment and improve the stability of the equipment.
2. Choose effective process measures to improve the operational level of staff.
3. Strengthen quality inspection and control technology during the entire welding process.
is usually possible in the first two items in manufacturing, but for some key products, the quality of solder joints still cannot meet the requirements due to the limitations of equipment and processes. The third method can be used to detect unqualified solder joints, which are controlled in each process, and the product must be compensated before leaving the factory, but the test results are affected by the rationality of the detection means and its accuracy. The fourth method appears in
, the product quality automatic detection system and control means, not only continuously tracks the entire welding process of each solder joint. Carry out test and feedback control, and compensate for external interference according to the automatic adjustment of welding specifications. Ensure the quality of each solder joint.
and automate manufacturing, improve manufacturing efficiency, select automatic quality control technology and print out relevant data and results of detection and control. This is very convenient for analyzing problems in manufacturing and production management, and must have good technical and economic benefits. The situation of manufacturing application in the past 10 years has confirmed that the use of automatic control technology is indeed a very effective way to ensure quality improvement in production efficiency and control costs.
