[PConline information] I don’t know how to flash the new engine oil, or I encounter problems with flashing the engine, mainly because I didn’t refer to the flashing tutorial carefully. Here I summarize the problems I often encounter; in addition, the flashing opportunity will clear the tablet data and make backups in advance if there is any important information.
This time, IWORK1X I30-C model flash REMIX2.0; the front camera has not been processed yet, everything else is perfect, and can realize dual systems; the camera is repaired in the later stage, and the Phoenix system is released to make everyone have a more fun.
1. Flashing method:
1. Use a USB flash drive according to the official information. (Refer to the official tutorial for details, it is relatively simple)
2. Professionals are all computer-based flashing and ROOT methods. (It's a bit complicated, it's the way to go for flashing the machine)
3. Continue to install the official method, install WIN10, and implement dual systems. But friendly reminder: Currently, the official package (there is a problem with the camera)
2. Install the three-piece set of flashing tools:
Notes:
Download the flashing package and flashing tools (three-piece set), close the 360 and other security controls, so as not to be blocked during the installation process, causing unnecessary trouble. The same is true for the flashing process. Let's say again, close the 360 and so on to avoid being blocked or occupied.
There are friends with WIN10 here. If you install the driver, you will encounter problems. It seems to be a statement error prompt such as verification. So here is a very simple operation. You just need to set the system time until around 2010, and then restart it to install it. Please don’t ask questions that cannot be installed.
2. Flashing deployment:
replaces the partition file of GPT.BIN according to your preference.
Note:
GPT.bin; it must be placed in the same directory as the flash machine package, and renamed, remove the Chinese characters, and leave only: gpt.bin.
3. Flash operation:
4. Flash mode of tablet press:
The tablet is in the power-off state, press and hold the volume up and volume down (do not let go), then hold the power button with the other hand, and then continue for a period of time to know that it is displayed on the screen.
5. Use a USB cable to connect the tablet and computer, and start flashing:
refresh successfully, unplug the USB cable, and wait for the system to power on (the time is about 15 to 30 minutes, wait patiently).
7: ROOT (I’ll be patient here and play slowly, the key is to look at the understanding)! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! Key steps of
(read carefully, and then ROOT after understanding):
first step (must be installed. The flashing tool mentioned above is mentioned in the flashing machine, and repeat the explanation here):
needs to install the driver on the computer, please install it in the following order:
1) First install iSocUSB-Driver-Setup-1.2.0.exe file
2) Then install IntelAndroidDrvSetup1.5.0.exe file
3) Finally install PhoneFlashTool_5.3.2.0_win32.exe Notes on file
:
a. The upgrade tool
b must be installed in the above order. When installing the above programs, please keep the default installation settings and path
c. Close the background antivirus security program! Step 2 of third-party software
such as Wandoujia: Enter the settings of
2.1 to open the "developer options"; turn on USB debug mode , and turn on OEM to unlock!
2.2 Use a data cable to connect the computer and tablet
to decompress the Root toolkit.rar, put the BOOT.IMG of the response model into the decompression package, "Hold shift" in the blank space in the folder and right-click, select "Open command window here" and enter the following command (you can copy and paste): adb reboot bootloader
Enter, wait for the device to restart and enter the fastboot interface, and then enter:
fastboot oem unlock
(it needs to wait for a while to see the situation)
Enter to unlock the limit, and then enter:
fastboot flash boot boot.img
Enter to crack the kernel. After entering
fastboot reboot
, restart to complete the kernel replacement work.
Step 3:
is found in the directory: root.bat double-click and wait for the command line to complete. At this time, you will be stuck in the "adb shell su --daemon" step~ unplug the data cable and restart the device manually.After the
device is turned on, SuperSU software is found, and it is already the system software.
is opened and used once. It will prompt to update the binary file, update once. It will prompt that the update failed. (OK and restart prompt) Click OK to close. (This step needs to be executed seriously, the key is here)
close the program! Then connect to the tablet and enter
root.bat
in the command line and restart it after ROOT is successful!
Full flash link: http://bbs.51cube.com/forum.php?mod=viewthreadtid=295760
Scan the WeChat and immediately add the Kubi Rubi Cube WeChat information account, and communicate and interact with Kubi Rubi Cube in all aspects in the form of text, pictures, voice, etc.
For more new Kubi Rubi Cube products and latest firmware downloads, please visit Kubi Rubi Cube official website: www.51cube.com, www.51cube.ne
Kubi Rubi Cube tablet computer operating guide [with pictures and texts, must-read for getting started]: http://www.51cube.com/Ch/Service/PadUserGuide.ht ml
Sina Weibo @Shenzhen Kubi Rubi Cube brand, activities, Q&A, new information is immediately obtained;
Search for WeChat public account "Kubi Rubi Cube" on WeChat, and communicate and interact in all aspects in the form of text, pictures, voice, etc.;
Kubi Rubi Cube brand community http://www.51cube.com, Kubi Rubi Cube FANS and you are caring about
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-