Steel mill price adjustment on September 14, 2022
(with scrap steel price)
According to data from China Steel Network Information Research Institute, , a total of 17 steel mills have adjusted prices today, of which :
upwards, accounting for 4%, with a price adjustment of 20 yuan/ton, upwards, highest increase of Xiwang Special Steel Building Materials;
downwards, accounting for 48%, with a price adjustment of 10-50 yuan/ton, with the largest decline in Yangtze Steel Iron and Steel;
1 stable 12 companies, accounting for 48%.
Specific price adjustment details are as follows:
Steel factory price adjustment
Built today Material A total of 14 steel mills have released price adjustments, of which:
has been raised by 1 company, accounting for 7.1%, with a price adjustment range of 20 yuan/ton.
downgrades 7 companies, accounting for 50%, with a price adjustment range of 20-50 yuan/ton.
6 companies are stable, accounting for 42.9%.
Today, 11 steel mills have released prices, including:
, accounting for 45.5%, with a price adjustment range of 10-40 yuan/ton.
6 companies are stable, accounting for 54.5%.
Today's steel mill brief analysis
Today's steel mill guides the mainstream of the price to run weakly, with a reduction of 10-50, steel futures fluctuated and weakened, spot market sentiment was set, merchants mainly bargaining and shipment, the market was strong, and the market was under darkness and transactions were in decline. The relevant futures trend is not good, and the cost-end support is average, and is expected to drop slightly tomorrow.
scrap steel price adjustment information
September 14th Fujian Rongxing special steel fell 30: Latest execution price: heavy waste is stopped, medium waste is 2770, cut one 2720 cut two 2670, light and thin material 2390, cut one 2500, break one 2660, break one 2610, CNC pin 2760, steel pin 2710, shaving briquet 2680 break two 2610, tax excluding.
14 Guangxi Liugang scrap steel is increased by 50-80 : Current counterweight 1 category 3290, counterweight 2 category 3260, punching 1 category 3160, punching 2 category 3290, punching 3 category 3290, punching 4 category 3230, punching 1 category 3250, punching 2 category B2950, punching 3 category 3250, punching 3 category 3200, shearing 2 category 3160, shearing 3120, shearing 4 category 3090, tax included.
9-14 Zhejiang Wantai scrap steel purchase price fell by 32, after adjustment: heavy scrap 1:3091, heavy scrap 2:3071, heavy scrap 3:3041, cutting 1:3011, cutting 2:2981, cutting 1:2911, cutting 2:2891, tax included 13%.
9-14 Guangdong Heyuan Longchuan Hanghui Steel industry scrap steel price fell by 30, pig iron heavy scrap 2750-2780, industrial punching scrap 2730-2760, air cutting material (60 cm) 2720-2750. Tax excluded, please note that it is prohibited to carry seals and other dangerous goods.
9-14 Guangdong Heyuan Derun Steel scrap steel fell 30: steel bar cut 3000, scrap material, new steel sheet material 3000; pure steel head, straight steel bar 2980; mold steel, material head round steel , track steel, train wheel 3000; silicon steel sheet stop collection; cold rolling, hot rolling, crushed punch 2930; excellent weight 2980; forging material, horseshoe 3000; heavy scrap 2930; mechanical cast iron, high-carbon steel , cast steel parts, raw and cooked mixed assembly 2930; thick shear 2880, excluding tax.
14 Chongqing Zuhang Steel Company scrap steel part is increased by 20: (6-8 thick) 2740-2790, (4-6 thick) 2690-2740, (2-3 thick) 2580-2630, front and rear axles of the large car. The engine has been removed, the car shell is about 2280, medium-middle-upper-market 2330-2380, can- color steel tile 1860-1960, car chips 2540. Note: The company receives goods normally, and no chunks that cannot be seen through will be collected, and no chunks will be accepted with oil. It is strictly forbidden to impose severe penalties on seals, tires, flammable and explosive dangerous goods once discovered.
14 Guangxi Fangchenggang Guangsteel scrap steel part is increased by 30-50, now counterweight 1 category 3310, counterweight 2 category 3280, punching 1 category 3160, punching 2 category 3310, punching 3310, punching 3310, punching 4 category 3240, punching 1 category 3260, punching 2 category A3100, punching 3 category 3430, shearing 1 category 3200, shearing 2 category 3170, shearing 3 category 3130, shearing 4 category 3090, processing large material category 1 2720, processing large material category 2520, including tax.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-