The solution to the washing machine displays e4 failure is as follows:
1. Check whether the faucet is on, or check whether there is any water outage at home.
2. You can also check the water inlet pressure. If the water pressure is too small, it is recommended to restart the washing machine when the water pressure is stable.
3, or you can unscrew the water inlet pipe of the washing machine to check whether the filter net of the water inlet valve is blocked by debris, and use a small brush, such as a toothbrush, to clean the filter net at the valve entrance of the water inlet pipe.
(A mini program has been added here, please go to the Toutiao client to view)
4. If fully automatic washing machine does not dehydrate, it shows the e4 fault code, indicating that a fault occurred during drainage. You can check whether the washing machine panel door is closed or whether the switch contact is poor. It is also possible that the capacitor is damaged due to poor motor performance. You can contact the washing machine for after-sales service to replace it.
The above is an introduction to what fault is the washing machine e4 and the corresponding treatment method. Sometimes it is because of poor contact, so you can try it again. It may be that the water inlet is timed out, there is no water inlet or the water inlet is slow, or there may be blockage at the water inlet pipe, and it may even be that the relevant hardware is broken and needs to be replaced.如果自己搞不定，那么就联系洗衣机售后客服咨询或者请他们上门维修。 Some of the above pictures and texts are from the Internet, please contact us if you infringe.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-