Not long ago, the charging head network was disassembled with MOMAX Momis Q.MAG POWER+ 10000mAh magnetic wireless charging mobile power supply IP100MFI. This product adopts a transparent tempered glass shell design, which is very hard-core. Today, we will continue to bring you the disassembly of the Momiz Q.MAG Power series power bank IP107.
power bank IP107 is also a magnetic wireless charging accessory. The shape and size are comparable to the mobile power supply of Apple , making it convenient for users to make phone calls, shoot or play games while magnetically charging. The size is similar, but the capacity of this Momis is as high as 10,000mAh, which is almost 3.5 times that of Apple. It supports both maximum 15W wireless charging and 20W wired fast charging, with good performance and practicality. Let’s take a look at the specific materials used in the product.
It is worth mentioning that the charging head network has previously disassembled Momis 10000mAh wireless charging mobile power supply, Momis iPower minimum PD3 20000mAh mobile power supply and other products. Welcome to check it out.
The front of the packaging box is printed with the MOMAX brand, conforming to the national standard logo, product name and related characteristics. The product usage scenario diagram and description are printed on the back of
.
package contains mobile power, instruction manual, precautions, etc.
Power bank has an integrated aluminum alloy shell on the front and side of the side, with sandblasting surface, rounded edges and corners, full of metal texture, and a good feel when you use it.
magnetic suction panel is made of PC material and is printed with wireless charging, Q.MAG POWER and PD fast charging logos.
sideways laser engraving product parameter information.
Model: IP107
Lithium battery capacity: 10000mAh (37Wh)
Rated capacity : 5800mAh
U SB-C input: 5V3A, 9V2A
USB-C output: 5V2.4A, 9V2.22A, 12V1.5A
Wireless output: 5W/7.5W/10W/15W
The product has passed the CE certification .
is equipped with a power button, USB-C two-way fast charging port and battery/fast charging indicator light at the bottom.
measured to have a body length of the power bank as 101.89mm.
width is 62.86mm.
thickness is 19.43mm. Compared with the Apple iPhone 13 Pro mobile phone, the overall size is much smaller.
and the mobile phone are magnetically attached to each other and will not block the camera.
In addition, the power bank has a strong adsorption power, which can be easily absorbed on the Apple iPhone 13 Pro and cannot fall off.
The feeling of holding it in your hand is full of metal texture and feels very good.
net weight is about 208g.
ChargerLAB POWER-Z KT002 detects the USB-C port output protocol, showing that it supports Apple 2.4A, Samsung 5V2A, DCP protocols, as well as QC2.0/3.0, AFC, FCP, PE2.0, and PD3.0 fast charging protocols.
In addition, the PDO message display port C also has three fixed voltage gears: 5V2.4A, 9V2.2A, and 12V1.6A.
power bank can perform 20W wired fast charging on the phone, and the fast charging indicator light will light green.
can also perform magnetic wireless charging normally. The two charging methods users can choose according to their own preferences, which is very convenient.
2. Momis magnetic wireless charging mobile power disassembly
Remove the plastic board on the back and paste the double-sided tape to fix it. There is also a plastic board in the middle of
, which corresponds to the small magnets, which can not only reduce the thickness but also enhance the adsorption force.
The four ends of the plastic board have legs to support.
Remove the battery cell and PCB board.
The metal shell edge glued to help fix the plastic feet and battery cells.
The back of the wireless charging coil is covered with double-sided tape, and foam is pasted on the outer side to prevent the metal ring from scratching the battery cell, and protective foam is also pasted on the battery cell.
PCB board is fixed with screws.
battery cell positive and negative electrode wrapped in highland barley insulating paper and tape insulation. There are two battery cells in total, and the tape is pasted and fixed together.
battery cell comes from Ganzhou NV Novi New Energy, and the single block specification is 5000mAh/3.85V/19.25Wh. The charging head network was disassembled and learned that the battery cells of Novi New Energy have been adopted by dozens of products from brands such as Momis, Pengyuansheng, Yubo, TEGIC, Pinsheng, iWALK, and Jiletang. The quality of the battery cells has been unanimously recognized by customers.
Remove all the small plate, coil and magnet.
There are 7 arc-shaped magnets, fixed to the iron ring. The front of the PCB board is equipped with a mobile power supply main control chip , inductance , resonant capacitor and microcontroller. The back of
is equipped with a wireless charging transmitting chip and a lithium battery protection chip. Close-up of
USB-C mother seat, via welding.
Power key patch welding.
Two silk-print CPD003 protection tubes are used for port C input and output switching protection.
mobile power main control chip adopts Yingjixin
IP5328, which is a multi-function power management SOC that integrates QC2.0/3.0 output fast charging protocol, FCP/AFC/SFCP
input and output fast charging protocol, MTKPE+ 1.1&2.0 output fast charging protocol, USB C input and output protocol, compatible with BC1.2/Apple/ Samsung mobile , synchronous boost/down converter, lithium battery charging management, battery power indication and other multi-function power management SOC, providing a complete power solution for fast charging mobile power.
Yingjixin IP5328 data information.
charging head network learned that products using Yingjixin IP5328P include Realme 10000mAh fast charging mobile power supply, RAVPOWER 15000mAh bidirectional fast charging mobile power supply, TEGIC 8000mAh wireless charging mobile power supply, Knightkoll 10000mAh bidirectional fast charging mobile power supply, Yubo 20000mAh PD mobile power supply, etc.
indicator light close-up.
XB7608 all-in-one lithium battery protection chip, built-in 14.5mΩ resistance MOS tube, only one capacitor is required for peripheral components, which supports overheating protection, overcharge protection, overdischarge protection and short circuit protection. It integrates high-precision voltage detection and ultra-low quiescent current.
thermistor close-up, used for cell temperature monitoring.
A wireless charging control chip, information is unknown. Close-up of
wireless charging integrated transmission chip, information is unknown.
MPP resonant capacitor close-up, 404J100V.
wireless charging coil close-up, leeds wire winding.
has been disassembled, let’s take a family photo.
Charging Head Network Disassembly Summary
Momis 10000mAh Magnetic Wireless Charging Mobile Power IP107 is a product that combines appearance, performance, practicality and a combination of aluminum alloy shell, which looks good and has a very elegant touch. Secondly, it supports wired and wireless charging, and users can choose according to the situation, and the power bank has a strong adsorption power. In addition, the capacity reaches 10,000mAh and the battery life is strong, and the size is compressed well, and it will not block the lens of the iPhone 13 series phones, meeting the needs of side charging and convenience.
charging head network learned through disassembly that the power bank uses aluminum alloy and a double-layer plastic board shell, which is highly protective.At the same time, carefully hollowing out the small magnet area, which does not affect the magnet adsorption force and can absorb the iPhone 13 phone well. Two Novi 5000mAh battery cells are built in, and the battery cells are equipped with lithium battery protection chips and thermistors for temperature monitoring. The main control chip uses Yingjixin IP5328, and the booster and buck inductor is glued and reinforced, and the material workmanship of the product is also good. As an official Apple partner, the quality of Momis products is guaranteed.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-