"ZCZG/ZCZH High -temperature solenoid valve" supplier, the [High -temperature solenoid valve] provided by this company, the quality is first, reasonable, and complete after -sales service. "ZCZG/ZCZH high -temperature solenoid valve" is suitable for the heavy industry and building pipelines. On the road of fluid forward, let Zhonglong Intelligent Control Valves solve your problems for you! [Power Valve] It can be applied to: chemical, petrochemical, petroleum, paper, mining, electricity, liquefied gas, food, pharmaceutical, water drainage, municipal, machinery and equipment, electronic industry, urban construction and other fields.
Product Name | ZCZG/ZCZH High -Temperature Power Valve | |
Product Model | ZCZG The nominal diameter | DN15-100mml10 |
1.6MPA-4.0MPA | ||
Valve | cast steel, stainless steel |
Product Overview:
ZCG/ZCZG high -temperature solenoid valve is suitable for medium temperature , High temperature, normal pressure, high pressure occasions, suitable for automatic control of pipelines such as medium and high temperature hot water, high temperature steam, saturated steam, overheating steam and heat conduction oil; Air conditioning, electroplating coating, rubber and plastic machinery, food and beverages, papermaking, printing and dyeing, and power mining are the products such as automated control engineering, project transformation and equipment.
"ZCZG/ZCZH High -temperature solenoid valve" supplier, the [High -temperature solenoid valve] provided by this company, the quality is first, reasonable, and complete after -sales service. "ZCZG/ZCZH high -temperature solenoid valve" is suitable for the heavy industry and building pipelines. On the road of fluid forward, let Zhonglong Intelligent Control Valves solve your problems for you! [Power Valve] It can be applied to: chemical, petrochemical, petroleum, paper, mining, electricity, liquefied gas, food, pharmaceutical, water drainage, municipal, machinery and equipment, electronic industry, urban construction and other fields.
Product Name | ZCZG/ZCZH High -Temperature Power Valve | |
Product Model | ZCZG The nominal diameter | DN15-100mml10 |
1.6MPA-4.0MPA | ||
Valve | cast steel, stainless steel |
Product Overview:
ZCG/ZCZG high -temperature solenoid valve is suitable for medium temperature , High temperature, normal pressure, high pressure occasions, suitable for automatic control of pipelines such as medium and high temperature hot water, high temperature steam, saturated steam, overheating steam and heat conduction oil; Air conditioning, electroplating coating, rubber and plastic machinery, food and beverages, papermaking, printing and dyeing, and power mining are the products such as automated control engineering, project transformation and equipment.
Structure Features:
① Sustainable and long -term power -on, using all metal seal, the medium fluid temperature can reach 450 ℃
② Different use mediums, adopt targeted sealing, improve the rationality of the electromagnetic valve
③ The structure is compact. The weight is one -third of the same product
④. The stainless steel piston structure can be automatically compensated. L1
main technical parameters And performance indicators:
parameter/model | zczczczczczczczczczczczczczCZCZCZCZCZCZCZCZCZTML1 | ZCZ | |||||
2. | 4.0 | Work pressure (MPA) | H8H8H8H8H8 0.1 ~ 2.5 | 0.4 ~ 4.0 | |||
light oil, steam, hot water | |||||||
media temperature (℃ ℃ ) | ≤250 | ≤ 400 | Power voltage 0 | AC200V? DC24V can be used as a special order | |||
H8 15 | 20 | 32 | 40 | 50 0 | ML0 8888888888888888888888888 0 | 100 | |
flow coefficient (KV) | An JB/T7352-94 stipulates | ||||||
功率 | 170VA | 480VA |
主要外形尺寸:
DN | L | H | D | D1 | D2 | D3 | b | f1 | f | n-d |
15 | 160 | 298 | 95 | 65 | 39 | 45 | 16 | 4 | 2 | 4--Φ14 |
20 | 200 | 304 | 105 | 75 | 50 | 55 | 16 | 4 | 2 | 4--Φ14 |
25 | 200 | 304 | 115 | 85 | 57 | 65 | 16 | 4 | 2 | 4--Φ14 |
32 | 200 | 314 | 140 | 100 | 65 | 78 | 18 | 4 | 2 | 4--Φ18 |
40 | 260 | 433 | 150 | 110 | 75 | 85 | 18 | 4 | 3 | 4--Φ18 |
50 | 300 | 433 | 165 | 125 | 87 | 100 | 20 | 4 | 3 | 4--Φ18 |
65 | 340 | 460 | 185 | 145 | 109 | 120 | 22 | 4 | 3 | 4--Φ18 |
80 | 380 | 460 | 200 | 160 | 120 | 135 | 22 | 4 | 3 | 4--Φ18 |
100 | 430 | 461 | 235 | 190 | 149 | 160 | 24 | 4.5 | 3 | 4--Φ22 |
安装说明:
1 .. Before installation, you should read the instructions of the product carefully, check whether the product meets the requirements of the use, be familiar with installation points, and make preparations.
2. When installing, the electromagnetic valve coil is upward and keep the vertical position. The arrows or markers on the solenoid valve shall be consistent with the pipeline flow. It shall not be installed in a place with splash or leakage.
3. Before we take the control of the pressure of 0.3MPa, rinse the pipelines, and completely remove the metal powder sealing materials in the pipeline and completely remove the rust. The steam pipeline is installed with a hydrophobic valve; the dirt and filter on the surface of the inner part of the water inlet valve must be cleaned regularly.
4. When ZCZG high -temperature high -voltage and high -voltage solenoid valves fail, in order to timely isolate ZCZG high -temperature high -voltage solenoid valve and ensure that the system runs normally, it is best to install bypass devices.
5. Do not install ZCZG high -temperature high -voltage solenoid valves in low concave places in the pipeline, so as to avoid steam condensation water, impurities and other precipitation in the valve and hinder the movement.
6. Ordinary ZCZG high -temperature high -voltage solenoid valve cannot be used in flammable and explosive hazards.
7. In the case of insufficient rigid pipelines, it is recommended to fix the front and rear tubes of ZCZG high -temperature and high -voltage electromagnetic valves with brackets to prevent vibration from working when the high -temperature and high -voltage electromagnetic valve of ZCZG is high.
8. ZCZG high -temperature and high -pressure solenoid valves need to be installed on the front and back pipes of the front and back pipes of the front and back pipelines for observation.
or more was edited by Zhonglong Dingkong. It is not allowed to reprint without permission.
2. When installing, the electromagnetic valve coil is upward and keep the vertical position. The arrows or markers on the solenoid valve shall be consistent with the pipeline flow. It shall not be installed in a place with splash or leakage.
3. Before we take the control of the pressure of 0.3MPa, rinse the pipelines, and completely remove the metal powder sealing materials in the pipeline and completely remove the rust. The steam pipeline is installed with a hydrophobic valve; the dirt and filter on the surface of the inner part of the water inlet valve must be cleaned regularly.
4. When ZCZG high -temperature high -voltage and high -voltage solenoid valves fail, in order to timely isolate ZCZG high -temperature high -voltage solenoid valve and ensure that the system runs normally, it is best to install bypass devices.
5. Do not install ZCZG high -temperature high -voltage solenoid valves in low concave places in the pipeline, so as to avoid steam condensation water, impurities and other precipitation in the valve and hinder the movement.
6. Ordinary ZCZG high -temperature high -voltage solenoid valve cannot be used in flammable and explosive hazards.
7. In the case of insufficient rigid pipelines, it is recommended to fix the front and rear tubes of ZCZG high -temperature and high -voltage electromagnetic valves with brackets to prevent vibration from working when the high -temperature and high -voltage electromagnetic valve of ZCZG is high.
8. ZCZG high -temperature and high -pressure solenoid valves need to be installed on the front and back pipes of the front and back pipes of the front and back pipelines for observation.
or more was edited by Zhonglong Dingkong. It is not allowed to reprint without permission.