Can I change the layout of the toilet? I want to change the position of the toilet. This problem is faced by most partners frequently. However, the bathroom is not to move the furniture further than the auditorium, but to further improve the location of drainage. However, pipe problems are often not handled well and there are many dangerous problems. The principle of toilet shifting is to keep it as motionless as possible, and it can be short or not long.
The toilet is facing the entrance of the toilet. This makes people feel uncomfortable both in terms of feng shui and feeling. If there is no particularly good solution for changing the wall, you can consider moving the toilet. In a toilet expansion plan, optimizing the location of the toilet may improve space utilization and make the planned route more complete.
In this way, you can also try displacement. After all, the pros outweigh the cons. If the toilet has the wrong hole spacing and cannot be purchased, or if it is replaced with a toilet with appropriate hole spacing for installation, the
short-distance shifter is similar to a single S-turn joint, but due to structural relationships, the displacement distance does not exceed 100mm at most. Using a shifter adds two turns and risks sewage blockage. During construction, the ground needs to be grooved, with a depth between 20-40mm. Together with the height of the cement mortar layer above, the purpose of not having to raise the ground can be achieved. The
long-distance shifter is equivalent to an extended version of the short shifter, but in order to consider the slope and try not to lift the ground, the diameter of the tube is compressed from an ordinary 110mm tube to a 66mm high flat tube. However, the attendant disadvantage is that the probability of traffic jams increases.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-