The charging head interfaces we usually use are almost all Type A, one, two, three, etc. When Apple 12 was released last year, it only provided a PD fast charging cable, but not a PD charging head. It is more expensive to buy a PD charging head. Many Apple 12 users' PD cables are dusty, but they still use traditional Type A Apple cable, causing waste of resources.
PD cable is a fast charging cable, one end is Type C and the other end is lightning. We can use the PD cable of Apple 12 by adding a Type C output port to the normal charging head (Type A). Although there is no fast charging protocol, it is also possible to charge 1A and 2A on average.
is below 5V1A charging head
output port is Type A
front and back side
6 pin Type C front and back side
6 pin structure, each side 3 lines, ground, power supply and cc
PD fast charging cable has 5 lines, ground, power supply, D-, D+, cc, 6 pin Type C does not have D- and D+, PD line is not recognized, we are in Type C Make a solder joint to deceive the PD wire.
both sides are made of two pads and cc to connect them together, which is equivalent to the Type C station having ground, power supply, D-, D+, cc, and PD cables that can identify and charge the phone.
connect to the ground and power supply
a elliptical hole in the shell, and add a power lamp hole
installed under
ordinary charging head is modified. You can use the PD charging cable of Apple 12 to charge all lightning interface Apple mobile phones, iPads and headphone charging chambers, or you can use the double-sided Type C cable to charge Type C appliances.
has only had a few cents of creative income since the creation of Toutiao, electronic DIY modification is also a learning and a fun.
