Everyone must be familiar with the water soaking truck. It is a car that has been soaked in water. In fact, there are many situations in the water soaking truck depending on the length of the water soaking truck?
The water soaking truck is divided into the following three categories according to the position where the car is flooded. The first is that the car is overwhelmed by the tires and the water reaches the height of the car's foot pads; the second is that the water surface does not cross the steering wheel or the center console; the third is that the entire car is flooded in the water.
The first type of water soaking wheel can still be purchased because it is just soaked in the chassis. If the engine does not inhale water, there will be basically no malfunction!
The second and third types are best not to buy. This kind of water-soaked truck is not only due to constant failure of the car, but also difficult to repair! The main fault is caused by poor contact of line plugs! is really full of problems, especially the line problem, and the maintenance is too difficult!
How to simply identify whether it is a water truck?
1 can be detected from the smell of mold on the floor glue and floor cotton!
Even if the water soaking truck has been thoroughly cleaned and repaired, it can smell a strong moldy smell from the inside of the car over time.
2, check whether there are abnormal rust spots in the hidden parts! Especially if there is any rust on the floor under the seats!
3. The place you can check is the car seat belt. When you buy a used car, you can pull out all the seat belts to see if there are any signs of mold in the seat belt!
4. The place you can check is to check it through the rubber strip of the car door. You can open the seal strip of the car door to see if there is any residue of mud and sand.
5, are there any obvious traces of repair or rust when the circuit plug is removed!
