Recently, especially in some areas of Guangdong, heavy rains have stormed, causing many blocks to be soaked in rainwater, and streets, underground parking lots and open-air parking lots to be flooded, resulting in a large number of cars being flooded. So, where will these cars soaked in rain end? That's right, these cars will flood into the used car market in large quantities. For friends who want to buy used cars, you must keep your eyes open, because water-soaked trucks can be said to be the least recommended, and they are the most serious of all used cars. So how should we identify the soaking water truck?
1. Can’t you buy all the soaked water trucks?
Can’t you buy all the soaked water trucks? No, we can decide whether it is worth buying based on the amount of water soaked in a car. The reason why you can't buy a water-soaked truck is because the whole car's circuit and electronic components will be damaged after being soaked in water. Most of the circuits and electronic devices of the car are located in the instrument panel and engine compartment . If the water level in the water does not exceed the floor, there is no problem with the car. At most, take out the carpet and dry it. If the water level exceeds the floor or even reaches the dashboard, you should buy it with caution.
2. Distinguish the water-soaked cart by smelling the smell
When I came to the used car market to see the car, the easiest step was to smell the smell inside by opening the car door, because the seats inside were extremely soaked by water. Other leather materials will definitely smell moldy after long-term soaking of water. This is also the easiest way to determine whether a car is a water-soaked cart. Even if you repair and dry the smell, it will not be able to get rid of it, so the first step is to smell it with your nose.
3. Look at carpet
If you can't find the problem by smelling it, because you can't avoid second-hand car dealers using other methods to cover up the smell, such as spraying a lot of perfume to cover it, you can observe the car's carpet, because the carpets contain dismissal materials. After soaking, you may see moldy, or even squeeze out water, so don't buy this car. Secondly, you can see if the carpet has been removed and deformed. These can be determined whether it is a water truck.
4. Look at the seat belt
Next, you can look at the seat belt, because the seat belt is the easiest to confirm the water level, because the seat belt will turn black after being soaked in water. If you see that the upper part of a seat belt is whiter, the lower part is black, the color is darker, and the color difference is very obvious, then you are sure that this is a water soaking truck.
5. Look at cigarette lighter
You can pull out the cigarette lighter to see if there is rust at the bottom, because the cigarette lighter will not be replaced, and it is also a problem that repairers are likely to ignore, so it is easy to find through these details.
6. Look at the engine compartment
If a water truck is soaked in, then there will be many details in its engine compartment that will inevitably reveal flaws. First, look at the fire-resistant cotton in the cabin. Like the carpet, it is easy to get moldy and discolor when soaked in water.
Finally, I hope this article can help everyone avoid buying blister car , because even if you are hit, there will be no big problem if you repair it well, but a car must not be required after blistering, because there are too many safety hazards. But don’t worry, because many details will be exposed by observing the water bubble truck.
