extruded panels are widely used in dry wall insulation, flat concrete roofs and steel structure roofs, low-temperature storage floors, low-temperature floor radiant heating heating pipes, parking platforms, airport runways, highways and other fields, and controls ground freezing and swelling. They are heat insulation and moisture-proof materials for construction industries with good quality and low-quality quality.
Introduction to UKCA certification:
According to the requirements of the UK building product regulations, starting from January 1, 2023, all construction products entering the UK must comply with relevant regulations and standards. After Brexit , the UKCA (UK Conformity Assessment) mark is the market access mark for products that intend to enter the UK market (England, Welsh and Scotland ). It covers most products that originally required the CE logo. At the same time, construction products/ mineral wool insulation materials entering EU still need to undergo CE certification .
Building insulation material /extruded Polystyrene (XPS) Foaming insulation material UKCA mark, like the CE mark, is responsible for ensuring that the product complies with the standards stipulated in the law. According to the CPR and the construction product standards that respond to the construction product regulations (such as: Extruded polystyrene (XPS) foam insulation material implementation standards are: EN 13162), select the corresponding certification system (System 1, 3 or 4), and test the extruded polystyrene (XPS) foamed products in accordance with the requirements of EN 13162, or evaluate and authenticate them, and add the UKCA mark.
Zhongke Yishuo CASfire maintains good cooperation with the UKCA certification agency Approved Body. It can conduct a testing and certification evaluation according to the standards, and obtain UKCA certification and CE certification at the same time.
Extruded polystyrene (XPS) insulation material UKCA certification – EN 14307
EN 14307 hermal insulation products for building equipment and industrial installations -Factory made extruded polystyrene foam(XPS) products-Specification;
EN 14307 Heat insulation products for industrial installations and construction equipment Factory extruded polystyrene (XPS) foam product specification.
EN 14307 Extruded polystyrene (XPS) insulation material UKCA certification involves product range:
This European standard specifies the requirements for manufacturing products made of extruded polystyrene foam. These products are used as heat-resistant materials for technical construction equipment and industrial plants, with an operating temperature range of about -180 to -C to +75 C.
At operating temperatures below -50°C, it is recommended to conduct special tests on the suitability of the intended use of the product (such as oxidation). In all cases, the manufacturer's advice should be followed.
products are manufactured in the form of coated or unprocessed plates, tubes, segments and preformed steam.
This standard is not applicable to products with a nominal thermal conductivity value greater than 0060 w/(m-K) when the average temperature is 108451m.
This European standard does not apply to products designed for thermal insulation of buildings and products used for sound insulation.
EN 14307 Extruded polystyrene (XPS) insulation material UKCA certification - Certification process:
1. Fill in the UKCA certification application form,
2. Provide product information, evaluate and certification system (system 1, system 3 or system 4)
3. System 1 conduct factory review or system 3 sample sending test
4. Sample performance testing (EN 13501-1 fire resistance performance level testing, etc.)
5. Issuing test report/UKCA certificate
6. Issue the DOP documents required for UKCA certification and to add the UKCA logo on product
UK Declaration of Conformity (UKCA-DOP):
UK Declaration of Conformity is a document that must be accompanied by most products that legally carry the UKCA logo. In your document as the manufacturer, or your authorized representative (where permitted by relevant laws), you should:
1. Declare the product to comply with the relevant statutory requirements applicable to a particular product.
2. Ensure that the file contains the name and address of the manufacturer (or your UK authorized representative) and information about the product and conformity assessment agency
UKCA certification – List of thermal insulation materials certification standards:
EN 13163-2012 Building insulation products, factory produces foamed polystyrene (EPS) products
EN 13164:2012 Building insulation products - factory produces polystyrene foam (XPS) products
EN 13165 Building insulation products, factory produces rigid polyurethane foam (PU) products. Specification
EN 13166:2001 - Building insulation products. Factory-made vinyl foam (PF) product specification
EN 13167:2012 Building insulation products - Factory-made foam glass (CG) products - Specifications
EN 13168 Building insulation products. Factory-made wood wire (WW) product specification
EN 13169 Building insulation products. Factory-made expandable perlite slab (EPB) product specification
EN 13170 Building insulation products. Factory-made products expandable cork (ICB). Standard
EN 13171 Building insulation products. Factory-made wood fiber (WF) product specification
EN 14063 Hot insulating material and products. On-site forming expanded clay light aggregate products. Part 1: Pre-installation specifications for loose-filled products
EN 14303 Insulation products for construction equipment and industrial installations. Factory-made mineral wool (MW) products. Specifications
EN 14304: Insulation products for industrial equipment and construction equipment, factory-made flexible rubber foam material (FEF) products and specifications.
DIN EN 14305 Insulation products for construction equipment and industrial equipment. Factory prefabricated foam glass (CG) products
DIN EN 14306-2013 Insulation products for construction equipment and industrial equipment. Factory-made calcium silicate (CS) Products
EN 14307 Insulation products for industrial equipment and construction equipment Factory-made extruded polystyrene (XPS) foamed product specifications.
EN 14309 Insulation products for construction equipment and industrial installations - factory-made foamed polystyrene (EPS) products
EN 14308 Insulation products for construction equipment and industrial installations - factory-made rigid polyurethane foam and polyisocyanurate foam products
EN 14313: Insulation products for construction equipment and industrial installations. Factory-made polyethylene foam (PEF) products. Specifications
EN 14314 Thermal insulation products for industrial installations and construction equipment. Factory-made phenolic foam (PF) product specifications.
EN 14315-1 Insulation products for buildings - On-site spraying of rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products, Part 1: Specifications for the installation of rigid foam spray systems.
EN 14316-1 Thermal insulation products of buildings. On-site thermal insulation forming of expanded perlite products. Part 1: Pre-installation specifications for bonded and loose-filled products
EN 14317-1 Thermal insulation products of buildings. On-site thermal insulation forming of flake vermiculite products.
EN 14318-1EN 14318-1 Thermal insulation products for buildings - Distribution of rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 1: Specification of rigid foam distribution system before installation
EN 14319-1 Insulated products for construction equipment and industrial installations. In situ formation of dispersed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products. Part 1: rigid foam specifications before installation of dispersion system
EN 14320-1 Insulation products are construction equipment and industrial facilities. On-site spray-coated rigid polyurethane (PUR) and polyisocyanurate (PIR) foam
EN 14933 Insulated and light filling products for civil engineering. Factory-made expanded polystyrene (EPS) products. Specification
EN 14934-2007 Insulated and light filling products for civil engineering - factory-produced extruded polystyrene foam (XPS) products
EN 16069 Insulation products for buildings. Factory-made polyethylene foam (PEF) products. Specification
EN13986 Artificial boards for construction—characteristics, compliance evaluation and labeling
EN 14307 Extruded polystyrene (XPS) insulation materials - related standards
EN 12939 Thermal behavior of building materials and building products Determine the flow resistance of eddy currents according to the process of plate thickness and heat flow plate width
EN 13164, Extruded polystyrene foam (XPS) building materials specification
EN 13172:2012, Iron hydration qualification assessment
EN 13467, Mapping of iron and prefabricated pipe materials for domestic and internal engineering, rectangular angles and linear determination of
EN 13468, chloride content of domestic wastewater and industrial wastewater, fluoride , silicate and sodium ion and pH value
EN 13823. Fire protection performance test of construction products: thermal exposure of single combustible materials to construction products, except floor coverings
EN 14706, wired insulating materials for household and in-use equipment; determination of the above application limit temperature
EN ISO 8497, thermal protection - determination of temperature transmission characteristics in pipeline insulation fixed state
ENISO 10456, Methods for determining the nominal value and measurement of building materials and building products, thermal and humidity characteristics, table measurement values and thermal protection values
ENISO 11925-2 Fire protection performance test of direct flame action products Part 2: Single flame test
For details, please consult: Zhongke Yishuo Quality Technology Service Co., Ltd.
Tel: 0592-3500085-801
Email: info@CASfire.cn
Website: http://www. CASfire.cn
From JJ2022
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-