In life, everyone has encountered water leakage, especially when the neighbors are leaking from their homes upstairs to downstairs. If the two parties do not negotiate well, they will have to torture each other, which will also lead to disharmonious neighborhood relations. Althou

Everyone has encountered water leakage in life, especially when the neighbors are leaking from their homes upstairs to downstairs. If the two parties do not negotiate well, they can only torture each other, which will also lead to disharmonious neighborhood relations. Although leaks are a troublesome thing, they are not impossible to solve. As long as you find the right cause, you can prescribe the right medicine.

(Mini program has been added here, please go to the Toutiao client to view)

Mr. Zhao from a certain community recently encountered a problem of water leakage in the bathroom. He happened to see a waterproof advertisement on the roadside, so he called the master to repair it. After less than a month of repair, the same place began to leak again. Mr. Zhao was more cautious this time and asked a regular maintenance company to come to repair it.

According to the agreed time, the maintenance master came to check. After careful inspection, he found that it was a water leakage in the bathroom caused by the crack in the water inlet pipe. This incident tells us a truth. When encountering leakage problems in life, you must find a regular maintenance master to check and accurately locate the leakage points, and find the right cause to prescribe the right medicine.

(A mini program has been added here, please go to the Toutiao client to view)

1. How to repair the bathroom water pipe rupture?

1. If it is a problem with the water inlet pipe, the maintenance master accurately locates the leaking point through the detection instrument and finds the specific leaking location. He needs to smash bricks to find the leaking water pipe, cut off the cracked water pipe, and replace the new water pipe with hot melt. If you don’t want to smash bricks, you can change the leaky water pipe to an open pipe and no longer use leaky water pipes.

2. If the drain pipe is leaking, you can find the specific leak point through the water injection test method and replace the water pipe at the leaking location without smashing bricks.

2. How to repair bathroom leakage caused by damage to the waterproof layer?

1. Do not smash bricks to make waterproof. Some people think this method is not feasible, but some customers think that the waterproof effect is good. Not only is the construction period short and the price is affordable, but the warranty time is 5-10 years. The maintenance master injects acrylate into a place where the waterproof layer is damaged (the waterproof layer is less damaged) to prevent and plug the leak through high-pressure grouting. This method has a short construction time and does not affect the use of the bathroom. It is more suitable for people who do not have time to supervise.

2. Waterproof that can be done by yourself. Apply permeable waterproof coating . First, clean the floor of the bathroom, first apply the gaps of the ceramic tiles, and then evenly apply the floor of the bathroom. waterproof agent will slowly penetrate into cement mortar , find the damaged waterproof layer, and perform waterproofing and plugging leakage. This method is low-cost and will not affect the lives of the family.

(A mini program has been added here, please go to the Toutiao client to view)

3. Re-waterproof the bathroom. If the waterproof layer in the bathroom is seriously damaged, then you need to smash the bathroom tiles and re-waterproof layer. First, smash the tiles in the bathroom, clean the base surface, and then level the base layer. Next, apply waterproof coating. The waterproof coating needs to be applied twice. After the first time is dry, the second time is applied. The directions of the two times are perpendicular to each other, which can completely cover and prevent brush leakage. The thickness of the waterproof layer is about 1.5mm, which is not easy to be too thick or too thin. After the waterproof layer is completed, water storage needs to be carried out for 48 hours of water-closed testing. This method has high construction cost and a long construction time, and requires continuous supervision. Therefore, this waterproof method will not be chosen until it is absolutely necessary.

The above content is a detailed introduction to how to repair water leakage in the bathroom. I hope it can help everyone. When encountering water leakage in life, you must find a regular maintenance company for repair, which is safe and secure.