radiator brings warmth to people in the cold autumn and winter. So, which radiator is better in 2022? Let’s learn about it with Brother Jin Flagship.
Keywords: Which is better material for radiator
The material with the best thermal conductivity is silver, followed by aluminum, and behind it is copper, steel, and iron. Currently, the main radiators on the market include: iron radiators, aluminum radiators, steel radiators , copper-aluminum composite radiators, etc. Among them, the most commonly used are steel radiators and copper-aluminum composite radiators .
Cast iron radiator:
Cast iron radiator has the advantages of high mechanical strength, corrosion resistance, long service life and low price; however, due to its aesthetic fatigue, large volume and weight, bulky, sand sticking inside the cavity, easy to damage the temperature control device, and high production energy consumption, unecotch production and manufacturing, and slow heat dissipation effect, it has been gradually eliminated by the market.
Aluminum radiator:
1.Aluminum radiator heat dissipation effect: Aluminum has better heat dissipation and is obviously energy-saving. According to professionals' calculations, in the same room, if the same specifications are used, the number of aluminum used is less than that used for steel. Aluminum has good oxidation and corrosion resistance and does not need to add any additives.
2. It is not restricted by the community heating system, has good heat dissipation and energy saving; if you find that the indoor temperature is not enough, you can also install a radiator after the heating season, but the aluminum material is afraid of alkaline water corrosion, and internal anti-corrosion treatment can improve the service life.
steel radiator:
1. The heat dissipation effect of the new steel radiator is more than 30% higher than that of the traditional cast iron radiator . Moreover, since the heating and pipes are not required to be covered, the heat dissipation effect can be increased by about 15% to 25% compared to the cast iron radiator.
2. It has beautiful appearance, but is afraid of oxidation. It has certain requirements for the heating system of the community and internal corrosion treatment should be adopted.
In response to the problem that traditional steel radiators are prone to oxidation and corrosion, some companies have researched and developed upgraded products - anti-corrosion diamonds. Anti-corrosion King Kong 6030F is a patented product. It is a subversive steel radiator, with a cost-effective steel performance and corrosion resistance much higher than ordinary steel radiators. Anti-corrosion King Kong 6030F radiator, special magnesium aluminum alloy is installed on the bottom of steel radiator , and active magnesium aluminum alloy is used to first produce oxidation reaction with the ions in the water to avoid "under-scaling corrosion" and "bottom metal corrosion". The consumption time of a piece of magnesium-aluminum alloy is greater than 15 years, which greatly extends the life of the radiator, and does not require full water maintenance and has a 15-year warranty.
Copper-aluminum composite radiator:
1. In general, the metal thermal strength of the copper-aluminum composite radiator is higher than that of the steel radiator; the water capacity of the steel radiator is greater than that of the copper-aluminum composite radiator, which is slow to heat and slow to cool, which is professionally called high thermal inertia. The copper-aluminum composite radiator heats up rapidly and is more suitable for intermittent heating. Once centralized heating heat metering is implemented, it has more advantages.
2. Because the thermal conductivity of copper and aluminum is very good, the heat dissipation ability of copper and aluminum radiators is much higher than that of other materials radiators, and its heat-price ratio is also much higher than that of other materials radiators.
3. High pressure bearing capacity, good heat dissipation effect, good anti-corrosion effect, no full water maintenance required after the heating season, no alkalization or oxidation risks, and is more suitable for water quality and complex heating systems in the north.
copper radiator
copper radiator: copper radiator has no restrictions on the PH value of the system water quality and the community heating system. The biggest disadvantage is that the price is relatively expensive. Some HVAC supermarkets no longer operate copper radiators.
or above is the relevant content of "Which radiator material is better?" summarized by the editor of Jin Flagship Aesthetic Radiator. I hope it will be helpful to everyone's life. If you want to know more information, please pay more attention to Jin Flagship. Jin Flagship Brother will provide you with more comprehensive, detailed and updated information.If there are any shortcomings, please correct and submit them.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-