Tatami is a very common bedroom layout for small rooms. Although tatami does expand the storage space, it also brings a lot of trouble: for example, tatami is costly and has low environmental protection; living in humid areas, tatami is prone to moisture after being used for a lo

small room tatami is a very common bedroom layout.

Although tatami does expand the storage space, it also brings a lot of trouble: for example, tatami has high cost and low environmental protection; lives in humid areas, tatami is prone to moisture after being used for a long time, and its service life is very limited.

small bedrooms are always limited to tatami. There are many layouts worth trying, such as building a half-wall at the head of the bedside , which seems strange, but is actually very practical.

①Low cost

Compared with the customized cabinets of the entire house, construction cost on the bedside half wall is lower . Usually, just use omelet board or wooden keel to base it, then apply gypsum board and then paint it. The process is simple, the board is used less and the environmental protection is high.

②Solid and durable

Half wall waterproof and moisture-proof performance, so you don’t have to worry about getting damp and moldy, and it has a long service life.

③Convenient storage

The thickness of the bedside half wall is about 10cm, and it is more than enough to place mobile phones, books, photo frames and other debris; the height is 1-2 meters, which is not depressing, and it is also convenient to reach out to take things.

④ High flexibility

Half wall only occupies part of the space on the head of the bed, and the bed or nightstand is not affected; if you want to adjust the bedroom layout in the later stage, there is no need to disassemble it, just move the furniture. is more flexible than the fixed-style tatami.

⑤Beautiful

Half wall does not affect the integrity of the room, it looks beautiful and generous. If the budget is sufficient, you can also make floating nightstands on both sides, which makes it more advanced.

Issues to note when building half-wall on the bedside

①Confirm the number of switch sockets and lamps in advance to reserve space for later installation.

② Be sure to level the wall and floor

③ If the base is used with Osong board, a 18-20mm gap should be reserved at the bottom to not affect the laying of tiles and floors.

④Edit edges on both sides and above, not affecting the overall aesthetics

(the picture is from the Internet, if there is any infringement, please contact us to delete it immediately)