The careless mason, with a hole in the holes in the wall facing both sides, the neighbor: push off the rebuilding quickly!
. You don’t know what strange things the master will do. Netizens complained that their family wanted to use porous bricks to build a partition wall. However, the master was too careless and found that the hole was facing both sides after half of the building. He was really angry when he saw it. Even the neighbors advised him: Turn off the rebuilding as soon as possible!
In fact, netizens themselves also found the problem. The hole faced both sides. After completion, it really couldn't nail a nail. It didn't bear any load at all. It fell off after hanging something for two days. Unexpectedly, the master said, "I'll just fill it with cement for you!" It's really unreliable, don't listen to him fooling him!
Build a wall with porous bricks. Do the holes face the sides or upwards?
must be facing upwards (that is, the hole is perpendicular to the ground). The principle of porous brick is to pour cement mortar into the holes. After the cement is dry, it will form mutual stretching to achieve the desired firmness. The holes facing both sides not only have poor load bearing, but also may cause cracks in the wall skin over time, which will be troublesome to rework.
Even if some people say that building walls on both sides saves more space, it would be better not to hang heavy objects in the later stage, but since it is a wall, even the nails cannot be subjected to stress, so the best solution for netizens is to push the wall off and build it again.
Porous brick wall, should I add a row of small red bricks at the bottom?
can be added or not. The main reason why some owners are worried that the porous bricks are hollow and have little density. Using small red bricks as the base layer can increase the strength. However, it should be noted that a row of red bricks needs to be added to the top of the porous bricks. Its function is to reduce the pressure on the wall to the top floor and solve the problem of easy cracking above the wall. This cannot be saved.
In addition to this, there are two other questions, many owners are also puzzled:
Q: Can porous bricks be mixed with red bricks?
A: is OK. It can be mixed in layered or a certain matching ratio, especially for partition walls that require window opening, adding red bricks will be more convenient.
Q: Can all bathrooms use porous bricks to build walls?
A: is not recommended. Porous bricks are not as waterproof as red bricks. Water seepage in the bathroom is not only troublesome to reinstall the home, but may also affect other people's homes.
Decoration is not only important for water and electricity, but also for wall building. Porous bricks are built quickly and save time, but their strength is not high. If you build the same as netizens' homes, don't think it's troublesome. You have to rework and rebuild it. It's just that the master is too careless!
This article was compiled and published by Qijia editor. Some of the works are from the Internet and the real source cannot be verified. If there is any infringement, please contact the editor to delete it directly. Thank you!
(Mini program has been added here, please go to the Toutiao client to view)
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-