Today, the editor is here to tell you how to effectively improve the working effect of the slime dryer. We should first work on the operation of the slime dryer. When we operate the slime dryer, we should avoid those problems: 1. When operating the slime dryer, first we should ma

2025/10/1523:53:33 home 1167

Today, the editor is here to tell you how to effectively improve the working effect of the slime dryer. We should first work on the operation of the slime dryer. When we operate the slime dryer, we should avoid those problems:

Today, the editor is here to tell you how to effectively improve the working effect of the slime dryer. We should first work on the operation of the slime dryer. When we operate the slime dryer, we should avoid those problems: 1. When operating the slime dryer, first we should ma - DayDayNews

1. When operating the slime dryer, first of all, we should master the wind speed in the drum of the slime dryer. If the wind speed is too low, the dynamic and static relaxation of slime and hot air will be caused, reducing the drying efficiency of the slime dryer.

2. It should be avoided that the coal slime does not "reciprocate" in the barrel of the coal slime dryer. In this way, the coal slime will be quickly removed by the wind, causing the storage capacity of the material in the coal slime dryer drum to be too low, and reducing the dynamic and static contact area between the material and the hot air.

3. In order to increase the output of the slime dryer, you cannot lengthen the length of the dryer drum. If the diameter of the slime dryer is too large, it will not be fully utilized, which will cause heat loss and increase the area occupied by the dryer equipment.

4. When installing the main machine of the coal slime dryer, please do not use an inclined installation method with the fire end high and the far fire end low. This installation method can only speed up the flow of materials to the far fire end and reduce the storage volume of coal slime in the drum. Thousands of lifting plates in the entire drum are lifting material at the same time from front to back, but the material raised is very little. In addition, this design also causes unnecessary trouble for installation and operation.

5. When working without using a slime dryer, you cannot just use the downstream drying method. This drying method will make the saturated water vapor of the slime unable to be removed in time during the drying process, and the running distance in the drum will be too long, causing the material to absorb water again.

6. The temperature of the inlet and outlet and the temperature of the outlet should be well controlled. If the temperature of the outlet is too high, it will cause a waste of energy. At the same time, it also reduces the quality of the dried coal slime, causing its color to become severely blackened or even paste.

home Category Latest News