There are many graphene brands on the market, and the quotations range from dozens to hundreds, but many people probably don’t know what the difference is. Today, what are the unique features of graphene floor heating that has been prepared with you? I believe that if you choose graphene floor heating after watching it, you will definitely avoid many detours.
Changsha Nuanfeng Graphene Floor Heating
1. Good floor heating, professional design
The first step of any project is design. If something goes wrong in the design stage, the next step is one mistake, one step is wrong. For graphene electric floor heating, good design is reflected in whether the elements such as insulation board , power configuration, heating area division, and thermostat positioning are scientific and reasonable.
1. Insulation board To install graphene floor heating with
, the floor should be covered with insulation boards, and the joints of the insulation board should be less than 5mm, and tape should be pasted at the joints. Good floor heating brands have clear requirements for construction floor flatness, insulation board laying method, gap size, gap treatment, etc., to ensure that the floor heating insulation layer is fully effective and make winter heating both comfortable and energy-saving.
2. Power configuration
The power configuration of a house should be set according to the house's insulation conditions, local historical winter temperature and user's temperature needs. Large or small power will lead to waste of energy consumption, excessive electricity bills, and the heating experience will also be discounted.
has a dedicated designer who will design drawings based on the house conditions and the owner's heating needs. When laying floor heating, there will be no big problem when laying strictly in accordance with the drawings and construction specifications.
3. The advantage of heating area division
The heating area division is that it can flexibly control the temperature of each room, improve the comfort of floor heating, and reduce unnecessary energy consumption. For example, the temperature of the elderly room can be adjusted to a higher point, and the idle room can be turned off or set to an energy-saving mode, etc.
Changsha Nuanfeng Graphene Electric Floor Heating
4. Thermostat positioning
Thermostat should be understood in addition to the brand, appearance and function, and special attention should be paid to the location and power in the installation design. The installation of the
thermostat must be coordinated with the special decoration for fine decoration and the same height as the lighting switch. It should not be against the window or there should be flowing airflow, which can represent the location of typical temperature in the area. If installed near the window, the temperature of the thermostat may be lower than the indoor temperature, and then it will turn the floor heating temperature up, resulting in waste.
In terms of power, the thermostat has a rated power and cannot be exceeded, otherwise the thermostat will stop working. If your thermostat eliminates quality problems or strikes, check whether the power configuration is reasonable.
Changsha Nuanfeng Graphene Electric Floor Heating
2. Good floor heating, high-quality materials,
Materials are elements that everyone cares about when shopping, especially floor heating, because it is buried under the floor, its quality is not only related to the later use effect and service life, but also to whether the house will face great trouble of redecoration.
The materials for graphene floor heating include: graphene floor heating, thermostat, temperature control probe, insulation board, silicon crystal mesh, plastic film and other auxiliary materials.
Changsha Nuanfeng Graphene Electric Floor Heating
3. Good floor heating, scientific and reasonable installation
3 points for product, seven points for installation. The following points should be paid attention to when installing good floor heating:
1. The floor is leveled in advance to ensure that the insulation layer is tightly fitted.
2. Before construction, thorough cleaning of the ground must be carried out.
3. During installation, the floor is covered with insulation boards.
4 and insulation materials are attached to the connection to ensure that the heat is not lost.
5, graphene floor heating, silicon crystal mesh, etc. must be laid evenly and straightly, and cannot be curled or wrinkled.
6. The floor heating area is prohibited, and any furniture on it must be equipped with feet.
7. Two power-on tests are carried out to ensure that all items meet the standards.
If one of them is not done well, it will affect the heating effect. Only by strictly standardizing the construction process and scientific installation can we ensure that we can use it with confidence and comfort.
