As a space with frequent water use, the decoration of this space is nothing more than focusing on drainage and waterproofing on the basis of realizing practical functions. So when decorating, what are the things that should be paid attention to in the bathroom?
, waterproof
What does the waterproof "blue wall and green space" mean? In fact, this is the difference between flexible (green) waterproofing and rigid (blue) waterproofing - flexible waterproofing has a certain degree of stretchability. When brushed on the bathroom floor, the floor tiles + pressure at the back will not be pressed to break; rigid waterproofing has better stickiness, and after brushing on the wall, then pasting the wall tiles, it has stronger stability.

And how high is the waterproof height of the wall? I suggest that all walls in the wall tiles are painted to avoid the waterproofing and only brushing part of the walls, resulting in different water absorption rates and hollow wall tiles.
Finally, in the corners near the water pipes and drain pipes, the waterproof details should be handled carefully to avoid minor negligence and water leakage. Then, after the bathroom waterproofing is brushed, you need to perform water-closing test .

. Floor tiles drainage slope
When laying floor tiles in the bathroom, be sure to reserve a drainage slope to ensure that when using water in the bathroom, the water can flow naturally to the floor drain and there will be no water accumulation. Otherwise, it will be really devastating to take care of the water in the bathroom every day.

. Water storage curve
The drain pipes of the bathroom floor drain and wash basin must be installed with water storage curve to prevent the odor from overflowing from the floor drain and wash basin, causing the entire bathroom to be smelly all day long.

. The drain pipe of the sink is against the corner of the wall
The drain pipe of the sink is as close to the corner of the wall, so that the utilization of the space below the sink will not be affected by the drain pipe, making it more flexible and convenient.

. Wall tiles press floor tiles
The wall tiles in the bathroom are connected to the floor tiles. It is recommended to adopt the "wall tiles press floor tiles" method, so that after the water on the wall is left on the ground along the wall tiles, it will not penetrate into the ground along the gaps.

The construction order of "wall tiles pressing floor tiles" is that the wall tiles construction leave the bottom part - floor tiles laying - the lowest part of wall tiles laying.
. It is necessary to separate dry and wet
The shower area of the bathroom. If the space is large enough, it is recommended to install a glass shower room. If the space is compact, use a shower curtain. In short, wet and dry separation is necessary, otherwise the entire bathroom will be wet after taking a shower.

. Anti-slip treatment of floor
The floor of the bathroom needs to be anti-slip treatment. First, floor tiles use anti-slip tile , and then the shower room floor is used for groove treatment. Only when taking a shower can you avoid slipping the soles of your feet and causing falls.

8. Bathroom door
The bathroom is relatively humid. Don’t use wooden doors to easily corrode. Then the bathroom glass door needs to be double-layer matte (Changhong) because a single layer matte glass becomes transparent after wet water, which will be very embarrassing.

9, threshold stone is necessary:
The bathroom door should be added to the door stone to block the bathroom water inside, and prevent the water from flowing to the outside aisle space when taking a bath or pouring water.

0, toilet water and electricity
Nowadays, many people will preset water and electricity (prepared for smart toilets). If there is water and electricity next to the toilet, it is recommended to distribute water and electricity on the left and right. Never put water and electricity on the same side, otherwise the short circuit of "water and electricity are one family" will cause a big pit!

1. The ceiling is
The bathroom is relatively humid, so it is recommended to enter the wire from a relatively dry ceiling, which is not easy to cause moisture and short circuit failure.

A bathroom is a space for shower, toilet and washing. As long as you enter the bathroom, you will almost certainly use water, so moisture is inevitable! Therefore, almost every decoration in the bathroom is "related to water". Some things seem to have nothing to do with water, but in fact they are directly and concise, such as the bathroom doors and wires mentioned above, so you must consider them carefully!