(I): Back-shaped ceiling
There are beams in the living room. When decorating, a very common and commonly used solution is to use Back-shaped ceiling.
Many beams in the living room run across our living room. If you don’t deal with it, it is really annoying.
If we want to eliminate the beam, we can use the help of a round-shaped ceiling to achieve integration with the beam.
Practice suggestions:
①. First of all, we need to confirm the width of the beam, that is, its cross-section. The common beam of is about thirty centimeters.
②, confirm the size of the font-shaped ceiling. The size of the back-shaped ceiling is the same as the cross-sectional dimension of the beam, and it is also thirty centimeters.
③, height of the ceiling. at this time, I personally recommend that everyone should make it to a height. In other words, the gypsum board finish surface of the suspended ceiling is consistent with the beam finish surface.
④, install suspended ceiling. At this time, we can install the keel, then install gypsum board, and finally scrape putty to paint. In this way, the beams in our living room will not be visible, and instead they are replaced by a zigzag ceiling.
Notes:
①. The back-shaped ceiling should be combined with the beam. Do not have split joints or height differences, as this may make the beam very obvious. Try to apply white latex paint to the roof and beams. will make the entire roof and beam integrated.
(II): Partial ceiling
The second more practical solution for living room beams during decoration is to adopt a partial ceiling.
partial suspended ceiling is generally used in the beams of the living room, which divides our living room into two situations.
The most common thing is that there is a beam in the living room, and this beam divides the entire living room into different spaces.
For this beam, you can use a partial ceiling.
can adopt the following two solutions:
①. The first solution is to carry out a partial ceiling in the large area of the living room. This will make the entire living room into a flat surface, and then we will use downlights and main lights.
②, Solution 2 is to adopt a local ceiling in another area. . For the living room area, you can use double eyelid ceiling.
Practice suggestions:
①, the living room back beam is divided into two areas. Everyone should try to use double eyelid ceilings for the large area and local ceilings for the small area.
②. If we want to achieve good lighting, we can also use a back-shaped ceiling for large areas, while small areas adopt a local ceiling.
③. When a partial ceiling, the beam and ceiling hanging should be made into a flat surface, so that the beam can be completely hidden within the partial ceiling and then matched with downlights.
(III): The hanging ceiling
There are beams in the living room. The third solution that can be realized is to use the hanging ceiling.
suspended ceiling means that we suspend the living room and dining room as a whole. One of the shortcomings of this suspended ceiling is that it will reduce the floor height of our indoor areas as a whole. If the floor height is not too high, you need to pay attention to it when hanging.
If the overall ceiling is suspended and the ceiling is suspended, the following solutions can be adopted:
①, and gypsum board ceiling is used. is the most common home decoration ceiling. Such a ceiling will reduce the indoor floor height by about 20 to 30 cm.
②, the entire ceiling, special treatment is taken for beams. In other words, while making a flat top, adopt a targeted treatment plan at the position of the beam. , for example, partially widen the beam, etc.
Notes:
①. The overall flat ceiling is relatively expensive. costs are very high.So if you plan to use a flat ceiling, you should budget for in advance.
②, the second point of hanging ceiling is the floor height. The above also told you. So before planning to choose the overall flat top, you need to measure the floor height. If the layer height is less than 2600mm, it is not recommended for everyone to choose.
(IV): Shaping treatment
The fourth solution for beams appearing in the room is to adopt some special shape treatments.
Special modeling of beams still have many solutions.
For different decorations, we can choose different styling solutions.
The following are common solutions:
①, S arc processing
Many friends hate the beams in the living room because the beams are square, so some chamfers can be used to deal with them. We can make an S arc.
S arc processing is just the part of the beam, and we do not need to deal with other positions. Therefore, the value of the substitution is low and does not affect the indoor floor height.
②, semi-arc processing
semi-arc processing, which is to process the sides of the beam into an arc shape. This way the beam can be visually weakened and looks very soft.
These can eliminate the oppressive feeling that beams give people in the living room, because the arcs have no edges and are very comfortable. The semi-circular arc of
is a special technology ceiling. Generally, we can use gypsum wire or partially installed ceiling to achieve it.
③, Wave Shape
The so-called wave shape refers to the shape processing at the position where there is a beam, and the shape of the shape is the wave shape.
In this case, it is generally common to cross beams in the aisle opposite to the entrance door.
We can suspend the ceiling under this beam, but the shape of the ceiling is wavy.
uses the undulating lines of the waves to smoothly and then match them with the wall, so that the beams cannot be seen and will look particularly unique.
④, slanted top
4, slanted top, which is the position of the beam, we directly make an inclined ceiling of a certain angle.
is a 45° inclined ceiling, and then combined with local ceilings in other locations.
Finally, what we can see is that the side of the plane is a 45° slope, so the beam cannot be seen.
at the end of the article
The probability of beams appearing in the house is very high, so everyone doesn’t have to worry too much.
Everyone should not be particularly superstitious. It is very common for beams in the living room and there are many ways to deal with them.
In this article, I share with you the solution of the living room beam, and you can choose according to the situation at home.
[Original text, pictures from the Internet, contact for infringement and delete]
