What should I do if the toilet leaks downstairs?
The treatment method for a toilet leak downstairs should be judged based on the leakage situation. First, it is necessary to determine whether the pipe is leaking or the waterproof layer is leaking. If the waterproof layer is leaking, it can be repaired without smashing bricks (must not grout and glue). If the pipe is leaking, you need to find the leaking location for repair (blocks need to smash bricks), and then repair the waterproof layer. Therefore, inspection must be done first and then repaired.
leaked to
Step 1: Water leakage detection
Due to different reasons for the leakage, the treatment methods are different, so you must first do a water leakage detection.
① Use the method of pressing or closing the main gate to detect whether the water pipe is leaking. Pressure equipment can generally be borrowed in the property. When pressing, check whether the pressure gauge is falling off to detect whether it is a pipeline problem. If there is no pressure equipment, you can use the method of closing the main valve to determine whether the pipe is leaking, find the main valve at home, and then close it for 10 minutes (the state of water discharge at home). After 10 minutes, you will find that the water meter is rotating. The severity of the water leakage in the water pipe can be judged based on the rotation time. If the pipe does not leak, it means that the pipe is fine.
observe the water meter to detect water leakage
②If the pipeline problem is eliminated, then the leakage is likely to be a waterproof layer problem. Waterproof layer detection generally requires supporting equipment and instruments, and most people really cannot detect it at home. If you want to accurately locate where the water leaks, this personal inspection is very difficult.
Step 2: How to deal with water leakage downstairs
①Tang pipe leakage treatment. First find the water leakage point, repair the water leakage point according to the cause of the leakage, and then do overall prevention and control. Because the water leakage reaches downstairs, there must be problems with the waterproof layer at home, and the waterproof layer needs to be treated.
waterproof layer leak caused by rupture of waterproof layer
② waterproof layer leak treatment. After eliminating pipeline problems, first find out the point of waterproof layer leakage and perform modification treatment. It is necessary to use the "Lightning Youjia Water Elf" product, combined with the ultrasonic guide, and the principle of the same frequency resonance, so that the sewage solidifies and turns waste into treasure. This method of repairing the waterproof layer without smashing bricks can be effective in the long run. After the waterproof layer is repaired, all possible leaks need to be treated to prevent subsequent leaks.
Notes:
① The toilet leaks downstairs and needs to be repaired from upstairs. The leakage problem cannot be handled from downstairs. The leakage problem cannot be fixed by performing high-pressure grouting and glue from downstairs. Moreover, the waterproofing treatment method of glueing and grouting is itself a problem.
② Surface sealing and coating can only repair leaks in the short term and cannot be effective for a long time. Due to material problems, it will also cause troubles in subsequent maintenance.
③ No matter how it is handled, detection is a crucial link, and efforts are in vain.
