directly sticks it, and there is no such thing as a seam beauty agent. There are three reasons for the seam: 1. Ceramic tiles will also expand and contract. Everyone knows that the floor will expand and contract due to temperature. In fact, there will also be ceramic tiles. If there is no seam between the tiles and the tiles, it is easy to cause drumming or cracking, which will greatly affect the aesthetics. 2. There are errors in the size of ceramic tiles. There will also be very small errors in the production of ceramic tiles. No joints are left and unevenness is likely to occur when laying, which affects the overall beauty. 3. Differences in workers' construction. No matter how good the master is, he will make small mistakes. If the bricks are seamless, it will be difficult to correct them. On the contrary, if there are joints, just adjust the few bricks with deviations.
What is the most suitable gap in the tiles?
In fact, there is no unified standard for the size of the gap in the industry. The tiles attributes and collage methods are different, and the gap size is not very consistent. The following data can be used to refer to:
. Kitchen and bathroom wall tiles: The gap is generally around 1-1.5mm, and must not be less than 1mm.
. Special effects: Like some antique bricks or exterior wall bricks , balcony strip bricks are better to leave a wide joint, and the gap can be widened to 3mm.
. Floor tiles: For example, vitrified tiles , etc. are generally left at about 1.5-2mm.
del Jia Meishi will introduce to you in detail the advantages of using seam beauty agent:
. The seam beauty agent does not shrink or depress after construction. The defects in which the single-component seam-applied agent easily shrinks and collapses, forming grooves are completely avoided.
. High brightness, high hardness. After curing, it is hard like ceramic, and it has certain flexibility and is not easy to break; it is brilliant and beautiful.
. It does not get moldy and does not turn black. It fundamentally solves the problem of blackening and moldyness in the existing tile caulking agent .
4. Resistant to rinse and blister. The seam-applied agent has extremely strong adhesion and can be used in places where water is often soaked in bathrooms.
5. Simple operation, use water to scrub directly. There is no need to paste textured paper and tape paper.
6. Applicable to substrates is extremely wide. It can be used for bonding and filling between different products such as ceramics, stone, glass, mosaics, microcrystalline stone , antique bricks, cement, concrete, wood, metal, etc., waterproof and sealing, and plugging and fixing. Kitchen, bathroom, living room, wall and floor tiles, etc. Everything that needs to beautify and decorate.
