Today I answered a question from an owner, and the owner sent me a picture of it. It was the sunken shower area he decorated last year. It took only a few months. Several places have been broken at the tip of the floor tiles in the shower area.
The current situation is one that it is not beautiful, and the other is very dangerous. My family is not wearing shoes when taking a bath, but they cut their feet and bleeding because they cut them.
I would like to ask me what should I do in this situation?
This situation has occurred. There are currently two ways to solve it. One is more troublesome and the other is more troublesome.
The more trouble-free way is to buy a metal corner strip online and use porcelain white glue to stick it to the tip of the bump. Although it is not good-looking, it is very practical.
The more troublesome method is to smash all the tiles in the dry area and re-pave the floor tiles.
It is more popular to make sunken shower areas now, so that the entire bathroom floor can be integrated, and there is no need to bury water barrier in advance on the ground.
However, it takes some effort to build a sunken shower area. For example, in the situation of the owner's house mentioned at the beginning, the two tiles are relatively fragile after cutting the corners. Needless to say, an adult or a child, if the foot hits the tip, the tiles are likely to have broken corners, so the imitation method is very simple, and it still requires real skills to do it well.
Three ways to do it for owners who want to make sunken shower areas.
First, if you want the overall shower area to look good, it is definitely best to deal with it by touching the tip, but the sinking height must not be too large, 2 cm is enough. When touching the tip, you can cut it into begonia corners to make the tiles themselves have a certain strength.
Secondly, if the requirements for beauty are not high, the floor tiles and the tiles on the facade can not touch the tips, which will expose the cross-section of the tiles. It is a bit ugly. However, in this way, the standing tiles can firmly support the tiles on the floor without worrying about the tiles being broken.
Third, it is equivalent to an upgraded version of adding a water barrier strip. There are two purposes for normal water barrier strips. One is to separate the wet and dry areas, and the other is to facilitate the installation of a shower partition above the water barrier strips.
The shower area is made into a sunken type. You can bury a marble of similar colors at the junction of the floor tiles and the sinking. The marble style is L-shaped or U-shaped. After pasting, it should be as flat as the floor tiles, which is very beautiful and practical.
We have used all three solutions, and the operating coefficient is not high. Owners who consider making sinking shower rooms can choose as they wish according to their personal preferences.
