A warm home is the best way to cure the cold. However, some friends also complained, what should I do if the heating is not hot? The heating is not hot, don’t panic! Today, Jin Jin will teach you these tricks! Let’s learn more about it with Brother Jin Flagship. Keywords: What to

2025/03/2821:40:35 home 1217

A warm home is the best way to cure the cold. However, some friends also complained, what should I do if the heating is not hot? The heating is not hot, don’t panic! Today, Jin Jin will teach you these tricks! Let’s learn more about it with Brother Jin Flagship.

Keywords: Radiator What to do if it is not hot

A warm home is the best way to cure the cold. However, some friends also complained, what should I do if the heating is not hot? The heating is not hot, don’t panic! Today, Jin Jin will teach you these tricks! Let’s learn more about it with Brother Jin Flagship. Keywords: What to - DayDayNews

01. There is gas in the tube

The heating pipe is so thick, it should have been filled with water, but now that the air is entered, the content of hot water will naturally decrease. Hot water is the main heating tool for water heating. If there is less water, the heating temperature will definitely not be high. How does the air in the pipeline enter? During the non-heating period, there is no water in the heating pipes, and it is all air. Once the heating period arrives, the heating water will slowly fill the pipes - note that the water slowly flows into the pipes, rather than entering instantly. This makes it possible to squeeze the gas in the pipeline into the pipeline and cannot drain it away. The problem of gas in the pipeline is relatively easy to solve, just degass:

Heating users can find a small valve from the top of the radiator, and open it to degass. Each set of radiators has such a valve, and we need to deflate it in turn.

floor heating users can find this small valve from the top of of water distributor. When deflation, you need to first turn off all the branch valves, then open them in turn, and deflate them respectively - for example, open the valve of branch 1 and deflate until no gas is released; then close the valve of branch 1 and open the valve of branch 2 and continue to deflate...

02, pipeline blockage

is the same as gas in the pipe. If the pipe is blocked by various impurities such as rust, scale, and sand, the hot water content will definitely be reduced. The probability of blockage of heating pipes is much greater than that of tap water pipes. On the one hand, it is because the water quality of the heating water itself is not good; on the other hand, it is because the heating pipes are vacant during the non-heating period and are very prone to rust or fall into dirty things. The pipes blocked by

need to be cleaned with professional cleaning equipment. This user cannot operate it himself, so he can find someone who specializes in this service - can't find it? Go to housekeeping company and ask, they usually have this service.

Generally, radiators are up to 5 years and floor heating is up to 3 years, so you should clean it up once.

A warm home is the best way to cure the cold. However, some friends also complained, what should I do if the heating is not hot? The heating is not hot, don’t panic! Today, Jin Jin will teach you these tricks! Let’s learn more about it with Brother Jin Flagship. Keywords: What to - DayDayNews

03. The filter is blocked.

. The heating generally has a filter, but this filter cannot block the above-mentioned scale, rust and other impurities, and can only block some large pieces of mud and sand. Therefore, the probability of the filter mesh being blocked is relatively small. Generally, it is a newly built heating pipe or a newly repaired heating pipe, which is easy to block the filter mesh. The filter of

is blocked, and the heating water cannot enter the room smoothly, so the heating temperature is naturally not enough. We can open the filter to clean it: the filter for floor heating is generally in the position of the water distributor; the filter for the radiator is generally in front of the first group of radiators, with a oblique downward plug, which grows like this▼

Just remove its plug and clean it - before dismantling, remember to turn off the main valve of the heating.

and some heating pipes will put the filter into the well in the corridor. When the user opens the well, he can see the filter. This can be found in the property for cleaning.

A warm home is the best way to cure the cold. However, some friends also complained, what should I do if the heating is not hot? The heating is not hot, don’t panic! Today, Jin Jin will teach you these tricks! Let’s learn more about it with Brother Jin Flagship. Keywords: What to - DayDayNews

If there is no problem above, there may be the following reasons:

First, the house has poor insulation performance and large heat consumption;

Second, the house decoration has too strict heating packaging and poor heat dissipation effect;

Third, there is a cover on the heating surface, and the heat cannot be fully emitted.

For the latter two cases, the problem can be solved by expanding the heat dissipation holes of the heating decoration objects and removing the cover on the heating surface.

or above is the relevant content summarized by the editor of Jinqiu aesthetic radiator, "What should I do if the radiator is not hot? Don't panic first, I will teach you a few tricks to get it done!" I hope it will be helpful to everyone's life.If you want to know more information, please pay more attention to Jin Flagship. Jin Flagship Brother will provide you with more comprehensive, detailed and updated information. If there are any shortcomings, please correct and submit them.

home Category Latest News