whole house customization quotation is tens of thousands, of which at least a few thousand yuan can be saved by keeping a careful look. Because you are likely to be charged repeatedly! Today, the five "pits" that are easily repeated charges in the whole house customization of shared by the editor today. Only by saving, collecting and looking at can you avoid being pitted.
pit position1
Wardrobe L-shaped corner overlapping part
L-shaped corner position is the place that is most easily calculated twice. Many merchants often calculate the corner position separately according to the projected area, so that the corner place is calculated twice.
But in fact, the most direct solution is to "disassemble" the L-shaped wardrobe and turn it into the following two parts to calculate.
pit 2
cabinet top sealing board and surrounding closing strips
quotation is generally calculated based on the projection area, so the top sealing board has been included. At the same time, the cabinet door will also include the closing strips, which is basically equivalent to being given to you. Without special needs, the merchant still added the top cover board and closing stick to the quotation, which is completely rejected.
In addition, there will be some cases when the top is uneven during installation. needs to add the top cover board , and charge by meter. At this time, you should pay attention: increases the billing size = actual measured size - the quotation already contains the billing size . If you forget to subtract the previously included part and directly charge according to the on-site measured size, then there is no doubt that you have been consumed twice.
pit position3
light plate
Custom cabinets often have door panels and cabinets of different colors and materials, so a light panel of the same color as the door panel is often added to the side of the cabinet to ensure the unity and beauty of the overall effect.
But if your cabinet door and cabinet body are the same color as the cabinet, there is no need to add to the light-catching board, because there is almost no difference in appearance. If you add an extra light-catching board, you will have to pay a thousand more yuan.
▲Calculator cabinet doors are the same color
There are also some cabinet with open grid or thin cabinet on the side. In this case, the light-seeking board is completely unnecessary. If you find that this part of the fee is added to the quotation, you must promptly request modification and removal.
pit 4
package upgrade fee
The hardware standard for low-priced packages of many merchants are low-end configurations, basically not required, directly choose to make up the price difference and upgrade to become a better brand. However, the price difference of here is often made by merchants to upgrade the brand hardware full price , and the price of hardware in the previous package was not deducted at all. A door alone requires five or six hinges. The whole house is made of a small amount, but it is not a small number.
pit 5
kitchen cabinet cabinet door
When making budgets, all cabinets in the kitchen will default to have cabinet doors, and the quotation is also charged in this way. However, if you have embedded electrical appliances , such as refrigerators, ovens, dishwashers, etc., cabinets in these locations do not require cabinet doors.
If the quotation contains the money for this part of the cabinet door, but you did not point it out, the merchant generally does not refund the money by default.
or above are the 5 places that are most likely to be charged repeatedly in whole house customization. It is recommended that you save and collect . When needed, you can check it to minimize unnecessary expenses and spend every amount of money on the blade.
(Mini program has been added here, please go to the Toutiao client to view)
