Preface
What is a prefabricated decoration system?
prefabricated decoration system is designed in the early stage and then standardized components are selected for installation. After the main body is completed, standardized components required for house decoration, such as: prefabricated partition walls, prefabricated ceilings, prefabricated bathrooms, etc.
Among them, the refined design in the early stage is an important part of the prefabricated decoration system. The design of the prefabricated decoration system is a product design based on the selection of parts. The structure and interior decoration, interior decoration and peripheral protection, interior decoration and equipment and pipelines, equipment and pipelines have a close relationship and mutual influence. The design of the prefabricated decoration system The relationship between several must be fully considered, conflicts must be avoided, and coherence and integration between various professions must be formed, so as to achieve the ultimate goal of drawing a blueprint to the end.
1
1
Ground system
prefabricated floor
prefabricated floor laying system, that is, through industrial production, the on-site dry construction process adopts zero formaldehyde environmental protection Materials are convenient and quick to lay the floor, and the entire process does not cause construction waste or dust pollution. It saves time and effort, and can be installed and housed immediately.
overhead structure
overhead ground height 10cm, the same as the conventional ground height. Pipelines can be laid under the overhead layer.
modular quick installation floor heating
buried floor heating pipeline fixed In the planned floor trough, the ground overhead layer adopts the bridge plate process on the heating pipeline to realize the floor heating floor for dry construction.
dry method
cancel the cushion layer without plastering.
surface layer material
surface layer material can be freely selected to use carpet, wooden floor, PVC floor, etc.
on site quick installation
floor can be quickly assembled and disassembled easily Unloading, facilitates maintenance
2
partition system
★ prefabricated partition wall
prefabricated partition wall system refers to the decorative surface layer, substrate, functional module and assembly components (keel, It is composed of connectors, filling materials, etc.), integrated wall products composed of dry-type working methods, factory production, and on-site combination installation. Suitable for non-load-bearing partition wall design in civil buildings such as living rooms, bedrooms, kitchens, and bathrooms.
★ Features
Prefabricated partition wall technology forms a certain cavity with the building wall through functional modules and components. Pipeline equipment can be laid in the cavity, realizing the separation of pipelines and main structures, without the need to damage the building walls again Body trough The burial of the line further increases the service life of the building. The wall panels are physically connected, easy to install, and can be disassembled by a single piece. In addition, an inspection port is also installed at the wall panel to facilitate later maintenance and replacement of equipment pipelines.
★Category
●Prefactory metal solid partition wall
is mainly filled with steel keel, mineral wool 6 and metal panels, with good fireproof, sound insulation and decorative performance;
● prefabricated steel frame glass partition wall
It is mainly composed of keel and steel frame glass panels, with fireproof, sound insulation and decorative functions;
● prefabricated hidden frame glass partition wall
mainly consists of keel and hidden frame glass Constructed by glass panel, with fireproof, sound insulation and decorative functions;
● Combination partition wall
As the name suggests, metal and glass can be combined, or steel frames can be combined with hidden frame glass panels, which usually have higher fire resistance, sound insulation and decorative performance.
3
Wallboard system
prefabricated wall panel
it is not purely one wall panel, but a wall assembly system, including double female grooves, lock grooves, metal lines and multiple structures, and long aluminum profile fixing The irreversible environmentally friendly PUR hot melt adhesive coating process is used to customize the decorative materials such as silk, hemp, gauze, wood and stone with natural texture into various interior wall panels or art boards, and then install the supporting sets. The aluminum profile is composed of a prefabricated wall interior system with a beautiful decorative feel.
Features
plate can be produced according to the height of the building floor, transported to the site assembled, fast installation speed, and after installation The wall is smooth and smooth without plastering. You can directly scrape putty and spray paint, which is conducive to safe and civilized construction on site. Creation, while eliminating the risk of hollow and cracking on the wall, also reduces the labor, material and machinery costs required for painting, which is conducive to reducing project costs.
4
door and window curtain wall system
Door and window curtain wall
Building doors and windows and curtain walls are important enclosure structures for buildings, and are a weak part of building energy saving and are also realized by the construction industry. The key to green, energy-saving, low-carbon and high-quality development. Improve the technological development level and innovation capabilities of the building sunshade and door and window curtain wall industry, develop and apply energy-saving technologies and products of the building sunshade and door and window curtain wall, and comprehensively improve the product and service quality of the building sunshade and door and window curtain wall industry, which is to promote the construction industry to achieve green, low-carbon and high An important way and guarantee for quality development.
Curtain wall Engineering market product structure
At present, new materials are emerging in the curtain wall market, new metal sheets, new wood, clay panels, photovoltaic products, sunshades Membrane, UHPC, FRP, GRC, clean water concrete , plants and other materials are also More and more are used as decorative panels in projects. New materials that can meet any concave and convex lines, shapes, as well as functional new materials such as lighting and energy saving will surely be more favored by architects in the future, and market development will make more rapid progress.
5
Ceil system
Ceil system ml0
prefabricated ceiling
ceiling occupies a very important position in the entire room decoration. Appropriate decoration on the top of the living room can not only beautify the indoor environment, but also create a colorful artistic image of the interior space. When choosing ceiling decoration materials and design plans, we must follow the principles of saving materials, firmness, safety, beauty and practicality.
Features of prefabricated ceiling system
Due to the factoryization, modularization and integration of construction of products, you can DIY decoration by yourself; ceilings and tiles are no longer subject to Based on the technical level of professional workers, only 2 people are required to install it according to the instructions on the site. The accuracy of decoration and quality can be achieved.
Three key positions of ceiling system
html l3
. expansion joint
Ceiling expansion joint is a treatment method set up to prevent the ceiling from cracking due to external reasons such as thermal expansion and contraction or building settlement. When the ceiling length is greater than 12mm, the plane area is greater than 100㎡, or when a building expansion joint is encountered, the gypsum board ceiling needs to be equipped with expansion joints.
. Maintenance port
When there are valves or maintenance parts for equipment, pipelines inside the ceiling, maintenance ports should be set up in gypsum board ceiling . maintenance ports regular regulations The grid is 350mm*350mm, 400mm*400mm. If the maintenance port is not connected to the maintenance port, the principle of adjusting the location range of the maintenance port is: after half of the body of the maintenance personnel enters the ceiling, they can reach out to inspect the equipment (armspan distance = adjustment range). If the maintenance port requires someone to be placed, it is necessary to add a covered keel or wooden board to reinforce it around. The maintenance port of
is recommended to use finished GRG material or gypsum products. It is not recommended to use a maintenance port made by gypsum board on site. Before sealing the plate, the maintenance port should be opened according to the actual situation on site. It should not be constructed only according to the drawings. Otherwise, the maintenance port on the drawings will inevitably conflict with the ceiling equipment points or building structure on site, and it will not be possible to inspect ( More contents of the maintenance port will be introduced in detail in the air conditioning system section at the back).
. Curtain box
The shape of curtains varies according to different designs. There are too many forms of curtains and different methods. When it comes to controlling curtain boxes, one thing you need to remember: consider as much as possible the bearing capacity of the fixed curtain track. The heavier the curtain, the firmer the base layer of the curtain box needs to be, and the stronger the nail force is. For example, the base layer of 18mm or 9mm thick for each layer is used to carry the force of the curtain track.
6
water supply and drainage system
water supply and drainage system
building water supply system can be divided into domestic water supply systems and production water supply according to water supply objects and requirements System, fire water supply system and joint water supply system. The building water supply system mainly consists of five parts: introduction pipes, water meter nodes, water supply pipeline network, water distribution or water use equipment, and water supply accessories (valves, etc.). There are several common water supply methods for building water supply systems: direct water supply method; water supply method for setting up a water tank or water pump; water supply method for setting up a water pump (or water tank) only; air pressure water supply method; and partitioned water supply method. In addition, there is also a method of distributing water supply, that is, an independent water supply system is set up according to the different water quality required for different uses.
Building drainage system is to remove sewage from residential buildings, public buildings and production buildings. The drainage system inside the building is generally composed of water receivers for sanitary appliances or production equipment, drainage pipes, cleaning facilities, ventilation pipes, sewage water lifting equipment and local treatment structures.
Prefabricated PB pipeline
The composition of the prefabricated PB pipeline system is similar. When the prefabricated PB pipeline system enters the traditional interior, the indoor water supply system is optimized at one time, and each water use equipment is used. One-to-one management, smooth water and constant water temperature. Flexible PB pipe can be bent freely, reducing the use of connecting pipe fittings, which not only greatly reduces the possibility of water seepage on the pipe interface, but also saves raw material costs. When repairing or replacing pipes, the decoration will not be damaged and cement sand cannot be seen. The pipes can be replaced directly. This is called environmentally friendly construction and is pollution-free.
At present, prefabricated PB pipeline systems have been gradually promoted and applied in the construction industry with their advantages of high efficiency, energy saving, environmental protection, etc., and have entered the industrialization stage.
7
hardware accessories system
Hardware accessories
Hardware is a general term for various metal and non-metal accessories installed on buildings, and is open and closed It plays an auxiliary role. The surface is generally coated or coated and has the characteristics of sturdy, durable, flexible, economical and beautiful. The hardware system can be divided into opening and closing parts, load-bearing parts, operating parts, and auxiliary parts. It serves the subsystem of the building system through the supporting and integration of the system. Within the framework of a large building system, changes in profiles, glass, glue strips, processing technology, and even opening methods require corresponding changes in hardware accessories to provide better service.
Requirements for choosing hardware accessories
. Currently, the profile standards in the industry are evolved and developed according to the European standards. In order to improve energy saving efficiency, the aluminum cross-section uses multi-cavity broken bridge insulation profiles. Good hardware should look thick, have a good surface gloss, a dense protective layer, and no scratches. More importantly, it should be flexible in opening.
2. Hardware accessories must be firmly embedded in the profile. Only when they are firmly combined with the profile can the anti-theft function be realized. Therefore, European standard groove profiles should be preferred. The combined hardware accessories are standardized and do not require special configurations. You can choose at any time. And excellent quality.
3. It can comply with the principles of not destroying the structure of the profile and less punching, easy installation and adjustment, and ensure performance requirements. The non-standard notch-free profiles are fixed by screws, but the anti-theft ability of the notch-free profiles fixed by screws is far less than the anti-theft ability of the European standard groove profiles.
8
8
waterproof insulation coating system html l6
Waterproof and insulation
is a new type of insulation material , a coating that achieves thermal insulation through low thermal conductivity and high thermal resistance. This product is made of high-quality natural minerals with chemical additives and high-temperature adhesives, and is manufactured through pulping, molding, molding, drying, finished products, packaging and other processes.
Features
1, has excellent weather resistance. Low thermal conductivity, stable thermal insulation performance, high softening coefficient, freeze-thaw resistance and anti-aging.
2. Use soft crack-resistant technology. The elastic modulus of each layer of materials is matched with the gradual change of layer by layer, allowing deformation and restriction deformation to disperse and dissipate deformation stress at any time. The base layer has strong adaptability to deformation and effectively prevents the occurrence of wall cracks.
3. The system has no cavity and strong resistance to negative wind pressure. It is suitable for multi-story and high-rise buildings.
4. Good breathability and strong breathing function. It has good waterproofing functions and can also relieve moisture from the insulation layer.
5 and fire resistance grade is B1.
6. Convenient construction, pre-mixed dry mixing and light aggregate packaging technology can avoid the problem of inaccurate weighing on the construction site. It can be constructed at multiple points and multiple levels quickly.
7. Strong corrective ability. It has good adaptability to construction of low-level structures and can effectively implement decoration corrections for local deviations.
8. The overall cost is low.
9
pipeline system
pipeline system
htt ml37
pipe separation
prefabricated pipeline integration system, It consists of water divider prefabricated integrated armored cable. Only water and electricity are needed to get to the home, without pre-embedding or troughing, can make full use of the existing advantages of the SI system to quickly wiring.
In traditional buildings, interior decoration equipment pipelines are pre-embedded in structural components such as concrete floors and walls or building surfaces.In this way, when the equipment pipelines age, concrete needs to be chiseled when renovation and renewal, which will have a higher subsequent maintenance cost and will also affect the service life of the building.
uses "pipeline separation" technology. Because it is reserved outside the main body of the building, prefabricated components can reduce the differences caused by pre-embedding, improve the modularity and standardization of components, reduce construction difficulty on site during construction, greatly increasing the number of construction difficulties during construction, greatly increasing Flexibility reduces high losses during construction.
pipeline separation is high in the early stage investment cost, but the later transformation cost is low and it is not harmful to the structural layer. When the electrical pipeline is peeled off from the structural layer, the protection cost and decoration cost of the pipeline will be increased accordingly.
Features
➢ Quick Construction
prefabricated pipeline construction, with a 70% increase in work efficiency.
➢ Groove-free construction
is combined with the SI system, so civil engineering does not need to cut grooves and holes, reduce construction waste, reduce noise pollution, extend building life, and facilitate decoration, modification, construction and upgrading.
➢ Plug-in installation
is convenient to install, and you can use simple tools to complete wiring and installation, greatly improving installation efficiency and reducing waste.
➢ High-strength shell
aluminum alloy chain armor, compressive strength 5000N or more, and the strength exceeds the metal casing.
➢ Safe and sustainable
has large current carrying capacity and high load, and the materials can be recycled, environmentally friendly, safe, making the home safer.
0
integrated kitchen system
integrated kitchen
i.e. prefabricated kitchen, by Independent packaging products consisting of integrated ceiling, prefabricated wall, integrated ceiling surface, prefabricated floor system, and kitchen parts.
Features
➢Make decoration simpler, no batch embedding, no painting, 100% full assembly, wet-free operation
➢Make life more secure, no aldehyde-free and non-toxic decorative materials
➢ Make the environment better, industrial production, dust-free construction , waste
➢ Make buildings sustainable, Si decoration system, power wiring is free from grooves, renovation does not destroy the original building structure stainless steel wall panel
➢ Stainless steel wall panel, wall oil stains are easy to clean
➢ Assembly hanging grooves, increasing wall opening Storage
➢ Si power track, countertop kitchen appliances can work flexibly
1
Overall bathroom system
Integrated bathroom
Integrated bathroom is an industrial product that integrates the bathroom. It uses an integrated waterproof chassis, wall panels and ceiling to form the overall space, and is equipped with an independent sanitary unit formed by various functional sanitary ware to realize various functions such as washing, bathing, and toileting in a limited space.
Features
●Dry construction and installation convenient
Assembled with building blocks, dry construction, installation and use on the same day, greatly shortening the construction cycle.
● pipeline separation, convenient maintenance
All pipelines are separated for easy maintenance.
● integral molding, water-free
The overall bathroom chassis is an integral waterproof tray, completely eliminating the leakage risks of traditional bathrooms.
● stable quality and reliable quality
Factory standardized production, stable product quality; standardized assembly on site to prevent unreliable quality caused by different levels of installation workers.
● Systematic management
One-stop procurement of all components of the overall bathroom, providing professional and technical services for the whole process before, during and after-sales.
2
HV electromechanical system
HV 0HVAC electromechanical
What we usually call HVAC specializes in four directions: heating, cooling, ventilation, and gas supply. Each direction has its own equipment and end. The connection between the equipment and the end is composed of pipes, connectors, valves, flanges and other accessories. The heating method can be centralized heating for boilers, heat pumps can be used for heating, and central air conditioners can also achieve cooling and heating; here we focus on introducing the HVAC system.
(1) In order to avoid the discomfort caused by indoor working and living personnel in winter and summer, artificial methods are used to consume a certain amount of energy and transfer heat and moisture in the air as needed. , create an indoor environment that makes the human body feel comfortable.
(2) In order to enable the machines, equipment and components working inside the building to operate normally, and maintain the indoor temperature and humidity that meets the normal operation of the machinery and equipment.
(3) According to the requirements of fire protection regulations, the HVAC project is also responsible for the use of mechanical ventilation equipment when a fire occurs, forcing the fire to discharge the fire combustion flue gas and force the input of fresh outdoor air.
(4) In most buildings with basements or indoor spaces without external ventilation structures, the HVAC project uses mechanical ventilation equipment to force the exchange of indoor and outdoor air.
3
intelligent intelligent system
intelligent intelligence
BIM, GIS, cloud computing , big data, artificial intelligence Technologies such as , Internet of Things, and robots will bring huge changes to the traditional construction industry.
In the future, the construction industry will surely realize the management and application of informatization of the entire industrial chain. Through information technology such as LAE, CAE, BIM, etc., it will build an information interaction platform in all aspects of the consultation, planning, design, construction and management of prefabricated building . , realize informatization and traceability management of quality responsibility in the entire life cycle of the prefabricated construction industry, and create new data synergy.
Smart home
Smart home is a platform that uses integrated wiring technology, network communication technology, security prevention technology, and automatic control technology to integrate facilities related to home life. Build an efficient management system for residential facilities and family schedules to improve Home is safe, convenient, comfortable, and artistic, and can achieve an environmentally friendly and energy-saving living environment.
Simple understanding is to connect some of our daily home equipment (such as audio and video, curtains, air conditioners, refrigerators, surveillance, security, home theater, background music, lighting, etc.) together.
Features
. Higher yield
3 intelligent manufacturing controls machine production (including AI, robots, batch control, etc.) through better control methods, and is more efficient than traditional manufacturing. In addition, the application of big data in intelligent manufacturing can help manufacturers understand the production process more effectively and also help improve production operations. Therefore, the main reason for intelligent manufacturing to bring higher output. 2. Higher accuracy In the production process, machine vision and other methods can bring more accurate identification. In addition, in the entire production process, traditional manufacturing industry needs to use better equipment and train operators in order to reduce the chance of failure. : : : : : : : : : : : : : : : However, it is still difficult to reduce the failure rate, and when intelligent manufacturing, big data can analyze errors and prevent failure rates due to errors.4
Whole House Home Furnishing System
Whole-house home
is a decoration solution that combines design, production and installation in decoration. The main core content is to customize various cabinets according to personal needs and preferences, such as wardrobe, shoe cabinet, cabinet , etc., which basically includes all cabinets and interior doors in home decoration .
What are the advantages of whole-house home customization?
. Can meet different personal needs
In traditional marketing models, furniture companies often follow the furniture trend based on simple market research Carry out furniture research and development and production. However, the furniture produced in this model is either full of inch does not meet the requirements or the style cannot meet personal preferences. Whole-house customization segments the market to individuals and designs furniture according to personal requirements. Consumers are one of the designers of furniture. You can make some specific requirements according to your personal preferences, such as color matching, personalized specifications, etc.
. Reduce inventory backlog
Under the traditional marketing model, furniture companies will reduce product costs through large-scale production in order to pursue profit maximization. Once the market encounters a slight accident, this type of large-scale production of furniture will inevitably lead to similarities. Unsold or backlog, causing Waste of resources. Whole-house customization is produced based on consumer orders, with almost no inventory, which accelerates capital turnover
Source: Tongji Maker Space
Statement: Information comes from the Internet, and the copyright belongs to the original author All sources, if there are copyright issues, please contact us to delete it immediately .
