Today we will talk about why wall-hung boilers need to be equipped with coupling tanks for heating. Wall-hung boilers are systems with small flow and large temperature differences, while floor heating is systems with large flow and small temperature differences. They are naturall

Today we will talk about why wall-mounted boiler heating needs to install a coupling tank. The wall-mounted boiler is a small flow and large temperature difference system, while the floor heating is a large flow and small temperature difference system. They are naturally mismatched.

If you encounter some large In a house with an area of ​​​​area, there will be partial heat loss. At this time, some masters will return the water and add an external water pump to the main pipe, but this often treats the symptoms rather than the root cause.

only increases the head and flow rate but does not increase it, so it cannot solve the problem. The fundamental problem is, and we only need to add a coupling tank between the external water pump and the wall-mounted boiler to solve the fundamental problem. The

coupling tank is an empty tank. Install it between the external water pump and the heat source wall-mounted boiler. Separate the floor heating and wall-mounted boiler to form a primary system and a secondary system to balance the hydraulic pressure difference and flow difference.

solves the problem of heat loss to pipes and heat sources caused by directly adding an external water pump. It can also be changed to solve the low temperature problem caused by unreasonable selection of local pipelines, effectively play the role of the wall-hung boiler, improve thermal efficiency, and extend the service life of the wall-hung boiler.