Friends who have renovated a house know that decoration is a very detailed and tedious task. Broken decoration is not a disease, but it is really fatal to live in it later. At least it affects the living experience and mood, at worst it affects life and poses safety risks. So, to

Friends who have decorated a house know that decoration is a very detailed and tedious matter. Broken decoration is not a disease, but it is really fatal to live in it later. At least it affects the living experience and mood, at worst it affects life and poses safety risks.

So, today we will talk about some decoration tips that you must pay attention to during the decoration process.

1

Raw material preparation

. When we buy wooden building materials, we must have a requirement for their quality. Regarding the keel used on the ground, it needs dried larch . This material is relatively strong and durable.

. Some large wooden boards should be sawn and air-dried after buying them. The wood needs to be blown dry by the wind, so it needs to be piled up piece by piece with space between them, so that the surface can be fully dried.

. Before entering the carpentry site, you must first draw a horizontal line , that is, use an ink fountain to draw a straight line parallel to the horizontal plane on the wall as the baseline for the construction project. If you start construction without elasticizing the horizontal line, you may see that the cabinet is crooked after the tiles are laid!

. As soon as the colored panels come into the site, they must be painted with paint. It is best to use the same type of paint from the same brand. The formulas of each brand of paint are different. Using the same brand can ensure the effect. If there is a quality problem, you will not be at fault. If you are not particular about it, you can not use the same brand, but you must use the same type of paint .

5. The ceiling fan cannot be installed on the ceiling keel . According to the construction process specifications, the ceiling keel must not be twisted or deformed. The installed keel should be firm and reliable, and the horizontal deviation around it should not exceed 5 mm. It is understood that the ceiling keel must not exceed 5 mm. Neither chandeliers nor ceiling fans can be hung directly on the ceiling keels, but hooks should be preset.

6. It is best to use external corner strips to protect the external corners of the gypsum board. The gypsum board is located at the external corner of the wall and is still easily knocked off. When it is knocked off, it is more troublesome to repair and it is not strong. Therefore, in actual construction, external corner strips are often used for protective reinforcement. After such treatment, not only the external corners are resistant to collision, but also the external corners can be made straighter.

7. The upper and lower protruding parts of the wooden door must be painted . On the one hand, the paint can play a protective role against corrosion and moisture; in addition, the upper and lower protruding parts are the stress-bearing parts of the door, so there will be friction. Paint is resistant to wear and tear.

8. The bottom of the bathroom door cover should also be brushed to be waterproof . First, the back of the door cover needs to be painted with waterproof paint, because the door cover will be in contact with the wall; second, the upper and lower ends of the door leaf need to be painted with waterproof paint; third, the places where the door cover meets the wall and floor tiles need to be painted with Waterproof glue .

2

Size

9. The door size of each room should be as consistent as possible. Generally, indoor doors have the same size and style; the bathroom can have a separate style; the color should be the same as or similar to the indoor door . As for the door size, a standard bathroom door is only 70 to 75 centimeters.

0. If you want to make some sliding doors at home to ensure that the pipelines are transparent, there is generally no need to make dark tracks. If there is a problem with the dark track, later maintenance and troubleshooting will be more troublesome.

1. The distance between the hanging bars of the suspended ceiling should not be greater than 300 mm from the wall. This is for safety reasons. If the distance is too long, it will not be strong enough. The distance between the keel and the wall should be as close as possible to the wall. If it is too far away, the inner corner will crack. Based on the top surface of the wall, use wooden keel and gypsum board to make a ceiling with a general width of 450-650mm.

2. The gypsum board should be fixed with countersunk head self-tapping screws , which penetrate 1~2mm into the board surface, and should be treated with anti-rust treatment. Gun nails cannot be used. The force of the gun nail is very strong, and the gypsum board is relatively thin. Most of the time, the gun nail will go directly through the gypsum board. Even if it does not penetrate, the tail of the gun nail is very small, so it cannot control the gypsum board at all.