If you want to make beautiful seams on ceramic tiles, it is very necessary to reserve enough seam width in advance. Generally, the seam width should not be less than 1.5mm, and the seam width should be 2-3mm. antique tiles and mosaic in order to be more beautiful. To better highlight the characteristics of ceramic tiles, you can appropriately increase the width of the seam, 3-5mm is appropriate.
Ceramic tile seams can prevent the ceramic tiles from being affected by thermal expansion and contraction, causing them to squeeze against each other, causing arching and falling off. If the seams of the ceramic tiles are too small, impurities and dust are likely to remain, which will affect the overall appearance, and it is difficult to make beautiful seams. Even if the beautiful seams are made, there is only one surface layer, which can easily cause falling off. Therefore, the width of the ceramic tile seams should not be too small.
Of course, some owners are not prepared to do beautiful seams at the beginning of decoration, and the width of the left seams is less than 1.5mm. What should they do if they want to do beautiful seams at this time?
The water-based sealing colored sand launched by Zhuogao can solve the problem of too small seams in ceramic tiles that are difficult to make beautiful seams. Water-based sealing colored sand is used for rock slabs, large slabs and sealing joint paving processes or ceramic tiles with gaps less than 2mm. It has good penetration ability and can reach deep into the gaps without causing collapse.
Water-based sealing colored sand can be customized according to the color of the tiles to achieve a "seamless" overall paving effect.
For narrow joint construction problems that are difficult to construct such as caulking agents, real porcelain glue , and epoxy colored sand, water-based tight joint colored sand can be easily solved, with simple operation and fast construction.
There is another option: use angle grinder to expand the gaps in the ceramic tiles so that subsequent normal seam construction can be carried out. However, you should be careful when using the angle grinder. Improper operation of the angle grinder can easily cause the ceramic tiles to collapse. occur.
If you want to make beautiful seams, you must leave seams in advance!
