industrial gas burner all use imported BERU industrial ignition electrodes, and the quality is very guaranteed. So what are the characteristics and varieties of ignition electrode ignition rods?
beru Beru ignition electrode
imported ignition electrode flammable varieties: flammable gas, bioalcohol oil , well-atomized diesel, kerosene, etc., all can be reliably ignited. The ignition electrode is made of titanium metal surface treatment, aluminum metal steel needle, high temperature anti-cracking 95 ceramic material, which can adapt to long-term combustion above 1500 degrees and wind wear without damage, deformation and oxidation. The burner ignition electrode has sensitive ignition, exquisite and beautiful shape, and the core electrode is made of imported alloy, which has the advantages of stable detection, durability, strong aging resistance, high temperature resistance, corrosion resistance, and high insulation strength. It has been well received at home and abroad. a wide range of applications. This product is widely used in various pipeline gas, liquefied petroleum gas , natural gas and similar water heaters, stoves, gas ovens, etc. In addition, BERU offers complete ignition systems combining ignition coils , ignition modules, ignition cables and connectors.
Regarding the fire resistance of the ignition electrode, if the ignition electrode is made of alloy material with a temperature resistance of about 1200 degrees, and the operating temperature can only reach about 300 degrees, then it will generally not burn red. If the operating temperature is high, it may burn red. High temperature resistance. Usually, the ceramics that everyone knows are basically daily-use porcelain, and you may also know about industrial porcelain. Ceramic screws belong to industrial porcelain and can withstand a temperature of about 1550 degrees at room temperature. Because they contain alumina and , the temperature resistance is different.
beru Beru ignition electrode
In fact, the two points are ultimately a matter of material. So what is the reference opinion given by the ignition electrode supplier?
1. It is generally not dangerous if the ceramic ignition electrode is red-hot. After all, it is often burned in the stove, so it is normal for the ceramic ignition electrode to be red-hot.
2. High temperature resistance. Usually, the ceramics that everyone knows are basically daily-use porcelain, and you may also know about industrial porcelain. Ceramic screws belong to industrial porcelain and can withstand a temperature of about 1550 degrees at room temperature. The temperature resistance varies depending on the alumina content.
3. Long life. It has high strength in high-temperature environments. It is not easy to deform or change its structure after long-term high-temperature operation. Moreover, the nickel-chromium alloy heating wire has good plasticity at room temperature and is relatively simple to repair after deformation. Nickel-chromium alloy heating wire has high radiation rate, non-magnetism, good corrosion resistance and long service life.
beru Beru ignition electrode
Generally speaking, this kind of ceramic uses alumina ceramic . This kind of ceramic is very stable in quality, safe and wear-resistant, and has extremely high hardness. It can cope with various extreme situations. Therefore, it is very suitable to be used as an ignition electrode for industrial gas burners.
