Author: Wanghui Home Inspection
For property owners, the most troublesome thing is that they spend money on mistakes during decoration and the quality of the property delivered is not up to standard. In order to avoid pitfalls, many owners will learn some relevant knowledge in advance before renovating and closing the house. In fact, compared with the overall participation of home decoration , grasping the supervision and acceptance of key nodes is the most important, which can reduce the chance of rework to a certain extent.
Today we share some decoration misunderstandings with high rework rates, so that owners can better grasp the golden time for acceptance.
1. Most of the water and electricity inspections are unqualified. Stop the loss in time.
Generally, the acceptance is from the start to the completion. From the case of refined decoration house inspection, it is found that the unqualified rate of water and electricity acceptance is as high as 60%, which is mainly reflected in the following aspects.
1. Leakage of water in and out of the bathroom: For example, there is no sealing ring installed under the sink, the installation of angle valve is loose, and there is leakage at the shower connection. All sewers were not deodorized and an odor was detected when the house was closed.
2. The drains in bathrooms and kitchens are clogged. Most of them are construction waste during construction. If you don’t pay attention before closing the house, the more it will accumulate later, it will cost a lot of money to clear and clear it.
3. Some socket panels are damaged or loose, and the panels need to be reinforced. The lamps controlled by the switches do not light up. When all sockets were tested for circuits, the circuits were installed incorrectly, and most of them were not protected by grounding wires and .
4. The correspondence between the indoor main gate and branch gate is wrong. It is necessary to close the branch gate and check whether each branch line is fully controlled, whether there is leakage in the socket, and whether the leakage protector can function normally.
2. There are many problems in the inspection room on the top of the wall
1. Ceramic tile areas: mostly hollow and stretched porcelain, concentrated in the punching holes of bathroom wall tiles, the junction of wall and floor tiles, the yin and yang corners and other areas. Special attention: threshold stone appears hollow, cracked, and has large closing gaps, so focus on rectification. The joints of tiles on balconies and bathroom floors should be carefully inspected. If the joints are not fully filled, water may seep easily in the future.
2. Latex paint: In addition to detailed problems such as dripping and uneven brush marks, focus on checking whether the latex paint is cracked, damp and moldy, the sun corners are damaged, and the yin and yang corners are not straight.
3. Suspended ceilings (mainly aluminum gussets, , and gypsum lines): The gypsum lines are mostly cracked, rough, and not straight. The top edge strips and junctions of the aluminum gusset plates are not tight, the cross seams are not straight, the seams between the edge keels and the wall are too large, and the local glue seals are uneven. These quality problems often occur in fine decoration, so be careful when inspecting and accepting them. examine.
Finally, I would like to remind everyone that for those of us who are inexperienced, we still have to rely on industry experts to find "peace of mind". Nethui Home Inspection, professional third-party home inspection, home improvement supervision , has a good reputation and a wide market, and is a good assistant for home inspections.
