1. Customization of cabinets
When customizing cabinets, it is necessary to choose E1 grade environmentally friendly panels. Pay attention to the edge sealing process of the cabinets. If the edge sealing is not tight, it will also cause the release of formaldehyde.
The kitchen is a relatively humid place. In addition to basic waterproofing, the cabinet also needs to choose melamine board with moisture-proof particles.
The hardware of the cabinet is the key to the service life of the cabinet, especially the quality of the hinge is related to the service life of the cabinet door. Pay attention to whether the opening and closing is smooth and whether there is abnormal noise.
Second, the installation of cabinets
Generally speaking, the installation order of cabinets is base cabinet-wall cabinet-countertop-faucet-basin-stove-appliances.
Floor cabinets must pay attention to the height, generally 78cm-85cm is the best, both practical and scientific. Wall cabinets are generally around 50cm-60cm, which can reduce the sanitary corners and look more beautiful. The distance between the base cabinet and the wall cabinet is about 70cm, avoid meeting each other.
The lighting of the cabinet should not be ignored. Installing sensor light strips under the wall cabinet can avoid blind spots.
There is a lot of dust during the installation of the table, so you need to do dust protection in advance. When installing the cooker, try to be 30cm away from the wall to avoid touching the wall with your arm.
If the cabinet has electrical cabinets,The socket of this kind of embedded electrical appliance needs to be opened in advance, and the size must be measured.
.
