The review I bring to you this time is the FRS series Kamen Rider SKULL released by Bandai in September. It appeared in "Kamen Rider × Kamen Rider W&Decade MOVIE 2010". As Shotaro's master is also the former director of the Detective Office. He died on the initial night in the pl

article is reproduced from 78DM

The review this time is the FRS series Kamen Rider SKULL released in Bandai , which appeared in "Kamera Rider × Kamen Rider W&Decade MOVIE War 2010". As Shotaro's master is also a former director of the detective office. He died in the initial night in the plot. Even though he appeared few times, he has a very high popularity among W fans. Let's take a look at the review

Product name: Figure-rise Standard Kamen Rider SKULL

Price: 3200 yen

Release time: September 2022

Packaging

High comparison

Collection of the classic right-handed crime hand

Both sides are product introduction html ml3

board

Instruction manual is also a part of the enclosed drawing

Finished

Height comparison The product is only treated with permeability

uses "lost drive" and is combined with the basic form of "skull memory" transformation. He has a very strong fighting ability and uses the "Skull Mailin Gun" to fight.

Details

The head is almost perfect for color separation, except for a little red on the forehead, which requires sticker part. There is a head cover on the back part

You can see lightning traces when you take off the hat

The hat needs to be filled with colors separately, and the details of the bow are portrayed

There are two bulges on the inside of the head corresponding to both sides of the head. Aligning requires a little patience, and the stability is pretty good

kit comes with white parts with notched edges and handheld top-rise parts. Unfortunately, there is only one black circle part that cannot achieve double hat

chest details, ribs are the same forehead chest armor, the gap requires black painted complementary color

lost drive has improved compared to the previous single J, the round hole located on the left is filled

html l0

back details, the scarf shape is very three-dimensional, but the details are a bit too round

arm details, except for the shoulder bracelet bracelet, all the W series products that have been sold before are the same shape and design

bracelet details

leg details

leg details

leg details

html l0

Accessories list

LT shape same gun, the shape hand is a new part, the index finger can be inserted into the trigger

The details on the right

The safe for installing W drive and basic Liumei memory

The details are very powerful, and the stickers on the manual are just as powerful in color repair positions. . .

The product comes with a W drive that is placed in the state, and the location of the six memories is also reserved. If you want to perfectly restore the safe on the initial night, you need to buy the previous three FRSs. W

New regulations. Hat-holding hand

The remaining two pairs of styling hand

Mobile reference FRS W

POSE

Summary

We want to squeeze the utilization value of the mold! Everyone should be familiar with the FRS body of

W. If there is no pull-down, there will be no complaints. The effect of the plain group is relatively good. If the color is supplemented, it is basically black (colors with strong hiding power are easier to supplement). The three years of progress is the new regulations for gunmen. In other aspects, I am willing to exchange for extra waste parts for a hat.

Azhai Comment: Taking advantage of the coupons of PDD, I received one for 92 yuan, perfect!